Modérateurs: Staff DIY, Staff Installations, Staff Juridique • Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 2 invités

Pure Class A Zenquito

Message » 01 Fév 2009 4:00

Hello,


I wasn't sure where to post the question but here goes. Does the Zenquito 15w Class A shift to AB at approx. 3 watts ? If it does, can the amplifier be adjusted to output only 3 watts Class A so it's pure ?

Thanks.
vizion
 
Messages: 4
Inscription: 01 Fév 2009 3:53
  • offline

Annonce

Message par Google » 01 Fév 2009 4:00

Publicite

 
Encart supprimé pour les membres HCFR

Message » 01 Fév 2009 9:55

Hello

The ratio class A / class B, and the power limit for the change, depends on the amount of bias current in the output mosfets.
You can adjust as you like.
The 15w class a is class A at 15W

examples :

with 0.7A by push pull, for a two push pull, you have 30w pure class A (1.4A total bias for a chanel)
with 0.5A by push pull, for a two push pull, you have 16w pure class A
with 0.4A by push pull, for a two push pull, you have 10w pure class A
with 0.22A by push pull, for a two push pull, you have 3w pure class A

Philippe
Philby
 
Messages: 9616
Inscription: 12 Mar 2001 2:00
Localisation: 33
  • online

Locking Class A

Message » 01 Fév 2009 10:00

Hi Philby,


I might try 260mA to get 4 watts Class A. How can I avoid having the system leave Class A ? Reduce voltage of the preamp ?

Thanks.
vizion
 
Messages: 4
Inscription: 01 Fév 2009 3:53
  • offline

Selectronic ProFET

Message » 01 Fév 2009 19:43

hello,


what is the class A bias of the ProFET ? 260 ma ?

thanks.
vizion
 
Messages: 4
Inscription: 01 Fév 2009 3:53
  • offline

Message » 13 Fév 2009 22:13

en anglais ca c'est bon!!!
beyma le HP pour les grands
mon instal: http://beyma.skyblog.com/
beyma
 
Messages: 287
Inscription: 15 Mar 2007 13:04
Localisation: var

Message » 13 Fév 2009 22:14

Philby listening it is a monster of the zenquito!!!
It is the pip(top)!!!
I says philby sir
beyma le HP pour les grands
mon instal: http://beyma.skyblog.com/
beyma
 
Messages: 287
Inscription: 15 Mar 2007 13:04
Localisation: var

Message » 13 Fév 2009 23:11

Hello,


I just confirmed that the bias is 415 mA. It would be fun if the amp is full Class A even with just a few watts.


Eric
vizion
 
Messages: 4
Inscription: 01 Fév 2009 3:53
  • offline



Retourner vers Amplis et Préamplis

 
  • Articles en relation
    Dernier message