ModĂ©rateurs: Staff Univers Casques, Staff Haute-FidĂ©litĂ©, Staff Juridique • Utilisateurs parcourant ce forum: fredoamigo et 27 invitĂ©s

Toutes les enceintes HiFi

Rockport Mira

Message » 28 Mai 2008 18:21

Images of the excellent sounding speakers - Rockport Mira - €17000

Image

Image

Image
Wizard
 
Messages: 250
Inscription: 19 Avr 2008 17:36
  • offline

Annonce

Message par Google » 28 Mai 2008 18:21

Publicite

 
Encart supprimé pour les membres HCFR

Message » 30 Mai 2008 15:00

Image
Wizard
 
Messages: 250
Inscription: 19 Avr 2008 17:36
  • offline

Message » 30 Mai 2008 20:50

:mdr:
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 30 Mai 2008 20:56

Image
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 30 Mai 2008 20:57

Image
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 30 Mai 2008 20:58

Image
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

caisse

Message » 30 Mai 2008 23:12

ça parait pas son poids :mdr: 8)
P.LM
 
Messages: 5584
Inscription: 30 Avr 2007 19:30
Localisation: F-C nord
  • online

Message » 31 Mai 2008 7:29

P. le maudit a écrit:ça parait pas son poids :mdr: 8)


53 kg poids plume :wink:
Câblage interne Transparent.
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 31 Mai 2008 14:03

Midrange - 5.25", custom-designed midrange went through 23 different iterations before the final design, which uses a mineral-filled poly-cone with a sophisticated motor system built to Rockport’s specs by Denmark’s Audio Technology. This handles frequencies from 140Hz–2.5kHz. Features “Symmetric Drive,” to reduce rise time by a factor of ten, resulting in greater linearity regardless of the cone’s position. Moreover, “Symmetric Drive” is lowers voice coil inductance, creating a more stable impedance and therefore simpler crossover topology, making the speaker easier to drive for high-impedance tube amps.

Tweeter - 1", Scan Speak Revelator motor system. Chosen for its low resonant frequency (1.5–2kHz) and ability to deliver the natural body of instruments.

Woofers - 10" Danish-made Vifas. As with the $91,500 Hyperion, the Mira’s 24dB-per-octave acoustic slope crossover is hand-built, and point-to-point wired with custom film/foil caps (made exclusively for Rockport), custom inductors, and Caddock resistors. All are spec’d at 1% tolerance, and the unit is epoxy-potted for mechanical stability as well as reduced microphonics.

Wiring - Internally wired with Transparent cable and connected via Cardas rhodium posts.

Enclosure - Danish-made enclosure of pure MDF. The front baffle is 3"-thick and the walls are 1"-thick. Seven individual braces lock the cabinet’s panels together, while at the same time creating separate acoustic chambers for each driver. The side-firing woofer housing has a 2" thick panel for the driver mounting surface and is rear-vented “with deeply radiused edges to prevent port turbulence.” (Payor believes that a properly designed vented enclosure allows for both lower driver distortion and higher motor strength, and can couple to room boundaries as well as sealed cabinets.)
The front-driver baffle uses a laser-cut Steinway-felt insert to reduce reflections from the midrange and high-frequency drivers. Long-fiber wool is used to damp the midrange enclosure, and a mixture of anechoic wedge foam and polyster is found in the bass cabinet.

Finish - high-gloss piano black polyester, an eleven-step process performed by the same European company that finishes Steinway grands.

Specifications - Rockport Technologies Mira
Retail Price: USD 16,999 (as at Oct 2005)
Floorstanding, 3-way vented loudspeaker
Driver complement: 1.1" soft-dome tweeter, 5.25" mid/bass driver, 10" side-firing woofer
Frequency response: 30Hz–20kHz
Sensitivity: 88dB
Impedance: 4 ohms
Recommended amplifier power: 50 watts minimum
Dimensions: 10.25" x 44.75" x 19.5"
Weight: 115 lbs. each / 52.16 kg each
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 12 Juin 2008 11:44

VoilĂ  les miennes Ă  peine sorties du carton :wink:
Photo floue due à l'excitation, d'ailleurs les images en général ne lui rendent pas justice, élégantes, élancées, racées, superbes, tels sont les premiers mots qui me viennent à l'esprit tant pour qualifier leur look que pour leur première écoute :wink:



Image
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 12 Juin 2008 11:47

Image
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 12 Juin 2008 11:54

FĂ©licitations :D

très belle prise que tu nous as fait là, vivement la suite :wink: :mdr:
Goan
 
Messages: 2119
Inscription: 01 Avr 2007 23:31
  • offline

Message » 12 Juin 2008 12:10

Merci Goan :wink:

Ce qui est sûr c'est qu'avec ce genre de pétoires, toujours pas importées en France, ce qui est plus que surprenant, je vais pouvoir dire et écrire à peu près n'importnawak :lol: .
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 12 Juin 2008 12:14

Enfin mon flair me dit qu'on ne devrait pas tarder à en entendre parler enfin, car j'ai cru comprendre que la maison lors de sa dernière participation à Vegas a montré des signes de marketing plus agressif et volontariste et que, quelques importateurs français sont sur les rangs depuis belle lurette :wink:
reyle
 
Messages: 4030
Inscription: 23 DĂ©c 2006 17:44
  • offline

Message » 12 Juin 2008 12:15

:D :D :D :wink:
van.alstine
 
Messages: 7423
Inscription: 01 Nov 2006 19:13
Localisation: france
  • offline



Retourner vers Enceintes

 
  • Articles en relation
    Dernier message