Modérateurs: Modération Forum Univers TV, Le Bureau de l’Association HCFR • Utilisateurs parcourant ce forum: manuxenon et 137 invités

Tout sur les écrans plats HD du marché (TV LCD, TV Plasmas, TV SED, ...)

Une date de commercialisation prévue pour les écrans SED ?

Message » 19 Juil 2005 13:00

flash41 a écrit:Canon annonce des prix nettement plus abordables que les plasmas avec des écrans SED de l'ordre de 550 /570 euros (taille ?)


C'est le target pour 2010, mais un SED sera toujours plus cher qu'un plasma à taille égale.

Un article fort intéressant in English:

TV Screens Face A Dazzling New Rival
SED displays rival plasma and LCDs, but mass production may be a problem

In the TV industry, no debate is better rehearsed than the squabble over the relative merits of plasma and liquid-crystal displays. Both are flat, but plasma proponents tell you their technology is better for larger TVs, while LCD lovers say their screens offer higher-resolution and lower power consumption.

The debaters may have to come up with a new set of arguments. By yearend, SED Inc., a joint venture between Canon Inc. (CAJ ) and Toshiba Corp. (TOSBF ), will begin producing screens for a new kind of flat television. The companies say the technology -- called surface-conduction electron-emitter display, or SED for short -- offers better images than rival systems while consuming one-third the power used by plasma and about half that of LCDs. "We believe the partnership will be a big success," says Canon President Fujio Mitarai.

To prove it, Canon trots out a 36-inch prototype at its Hiratsuka plant near Tokyo. Dark colors appear richer than those on LCDs, while letters crossing the screen are far clearer than with plasma displays. The only place where SED appears less crisp than rivals is in brightly lit rooms -- the kind you might find at an electronics store. "In the living room, I don't think there will be a big difference," says Shunichi Uzawa, president of SED Inc.

With SEDs, the companies have combined the sharp resolution of traditional tube TVs with the size and weight of flat screens. While most experts say CRTs offer a better image than plasma or LCD, the picture tends to deteriorate toward the edge of the screen, and they look clunky next to sleek flat panels. CRTs use a single big picture tube that's almost as deep as it is high. SEDs, by contrast, give each pixel -- or dot of color -- its own tiny electron source, effectively creating thousands of CRTs. That means the screens can be just a few centimeters thick, and picture quality is as crisp at the corners as it is in the center. "The performance of SEDs is outstanding," says Hisakazu Torii, an analyst at market researcher DisplaySearch.

LESS IS MORE EXPENSIVE
Yet for all of SED's apparent advantages, rival technologies don't yet have much to fear. For one thing, it will take Canon and Toshiba years to reach mass production. The companies won't get beyond 75,000 SED TVs a month before 2008 and are predicting 250,000 a month in 2010. By contrast, Matsushita Electric Industrial Co. (MC ) alone plans to produce 400,000 plasma TVs monthly by the end of 2006. "SED is an excellent technology, but there is a long way to go before it can be mass-produced," says Takeshi Uenoyama, director of Panasonic's Advanced Technology Research Laboratories.

Size problems and manufacturing costs may be bigger concerns. SED Inc. will initially produce panels for 50-inch TVs and expects to make 40-inch models sometime later. But making smaller screens means squeezing each pixel and its electron gun closer together, which adds complexity and cost. And TV prices are in free fall. DisplaySearch expects 50-inch plasma prices to tumble by 30% this year, while LCDs are dropping even faster. "I cannot see [SEDs] selling alongside existing plasma technology for the same price for the same screen size," says Paul O'Donovan, an analyst with researcher Gartner Dataquest.

SED Inc.'s Uzawa says SEDs will be "competitive" but admits that their introduction has been postponed as Canon and Toshiba have struggled to bring down production costs. Indeed, Canon has been working on SEDs since 1984. Satomi Ushioda, an analyst at Nikko Citigroup (C ) in Tokyo, predicts there could be further delays -- especially since the companies aren't willing to share the technology with other manufacturers, which could help lower costs. That might disappoint consumers with an eye for great pictures. But it would give plasma and LCD makers lots of time to hone new arguments before SED makes its debut.



By Ian Rowley in Hiratsuka, Japan
Grubert
 
Messages: 2163
Inscription Forum: 09 Avr 2002 2:00
Localisation: Espagnol en Suisse
  • offline

Message » 19 Juil 2005 13:02

flash41 a écrit:Même si un 42 " valait 1500 /2000 euros ce serait compte tenu de la qualité dû au principe de fonctionnement ,une bonne affaire ! :wink:


A condition que la technologie soit fiable !
Si on se retrouve avec des p'tits canons sans munition, ca nous rappelera les blocages de micro-miroirs et autres pixels rouge, vert ou bleu qui se mettent en greve :-?

M'enfin, Canon doit maitriser le sujet :mdr: :lol:

A+
shacard
 
Messages: 5334
Inscription Forum: 16 Oct 2000 2:00
Localisation: limousin
  • offline

Message » 19 Juil 2005 14:44

shacard a écrit:
flash41 a écrit:Même si un 42 " valait 1500 /2000 euros ce serait compte tenu de la qualité dû au principe de fonctionnement ,une bonne affaire ! :wink:


A condition que la technologie soit fiable !
Si on se retrouve avec des p'tits canons sans munition, ca nous rappelera les blocages de micro-miroirs et autres pixels rouge, vert ou bleu qui se mettent en greve :-?

M'enfin, Canon doit maitriser le sujet :mdr: :lol:

A+

Je suis très optimiste aussi bien pour la techno que pour les prix !
La concurrence est rude face au plasma et au LCD .
Canon et Toshiba planchent sur leur procédé depuis 1999 , ce n'est pas pour que ça reste dans les cartons ou au niveau proto !
Le seul souci c'est de pouvoir attendre 2006 voire 2007 que ça vienne sur nos étagères ! :wink:
flash41
 
Messages: 5586
Inscription Forum: 01 Juil 2004 9:29
Localisation: Côte de granit rose
  • offline

Message » 19 Juil 2005 14:57

Petite correction : Canon fait des recherches sur la techno SED depuis 1984. :o
Grubert
 
Messages: 2163
Inscription Forum: 09 Avr 2002 2:00
Localisation: Espagnol en Suisse
  • offline

Message » 19 Juil 2005 15:42

Grubert a écrit:Petite correction : Canon fait des recherches sur la techno SED depuis 1984. :o

Alors raison de plus !!! :wink:
flash41
 
Messages: 5586
Inscription Forum: 01 Juil 2004 9:29
Localisation: Côte de granit rose
  • offline

Message » 24 Aoû 2005 12:28

Grubert a écrit:Petite correction : Canon fait des recherches sur la techno SED depuis 1984. :o

Pas de nouvelles sur LE SED depuis ?
flash41
 
Messages: 5586
Inscription Forum: 01 Juil 2004 9:29
Localisation: Côte de granit rose
  • offline

Message » 24 Aoû 2005 14:16

Pour l'IFA de Berlin surement la semaine prochaine.
wario-959
 
Messages: 2599
Inscription Forum: 10 Aoû 2002 7:22
Localisation: Béziers !
  • offline

Message » 24 Aoû 2005 19:33

Plus je lis d'article sur le web plus ça confirme le sentiment que le prix des plasmas va avoir droit à une belle cure d'amaigrissement dans les prochains mois.
La bonne nouvelle dont personne ne parle dans tout ça c'est que les 50 pouces vont mécaniquement prendre une claque.
On peut imaginer un carrefour commercialisant d'ici la fin de l'année un modèle entre 1500 & 2000€ mais on devrait surtout sans doute voir fleurir des pana, hitachi & Co à 3000€...
Le moins cher que j'ai trouvé aujourd'hui est à 4000€.

Sur ce je vais lire l'horoscope :-D
ferhat
 
Messages: 99
Inscription Forum: 21 Juin 2003 19:22
  • offline

Message » 24 Aoû 2005 19:36

Oups mauvais sujet.
Merci à un modo d'effacer le post... Désolé...
ferhat
 
Messages: 99
Inscription Forum: 21 Juin 2003 19:22
  • offline

Toshiba annonce le SED pour le printemps 2006 au japon

Message » 06 Sep 2005 9:02

"et chez nous avant la fin 2006" d'après tomshardware.
http://www.tomshardware.fr/articletenda ... &NumPage=2
snips1
 
Messages: 1250
Inscription Forum: 05 Juil 2004 19:40
  • offline

Message » 06 Sep 2005 12:35

Grosse envie de patienter quand on lit ça non ? :-)
johndoeuf
 
Messages: 3290
Inscription Forum: 30 Avr 2004 19:37
Localisation: Nîmes
  • offline

Message » 06 Sep 2005 13:44

Dites donc les gars,

La technologie SED ca vous rappel pas quelque chose??? Une techno bien de chez nous qui s'appelait les "micro pointes" et qui nous promettait des ecrans plats de grande taille a peine plus chere que les CRT???

Putain de marketing a la francaise... on a les idée mais y'en a pas un qui est foutu de les mettre en pratique et de les vendre.....
cybtech
 
Messages: 287
Inscription Forum: 06 Déc 2004 16:16
Localisation: Dans l'9-5 ;o)
  • offline

Message » 06 Sep 2005 14:12

johndoeuf a écrit:Grosse envie de patienter quand on lit ça non ? :-)


Le plus intéressant, c'est qu'ils notent une résolution de 1920x1080 pour un 36" !! On pourrait donc avoir, pour cette techno, une réso Full HD sur des diagonales raisonnables, ce qui est le point faible du plasma aujourd'hui.

Reste à voir si la commercialisation démarre bien en 2006 (de moins en moins pressé de changer mon pana moi ;-)
Alexis Belhomme
 
Messages: 923
Inscription Forum: 16 Nov 2003 20:14
Localisation: En Bretagne à manger des galettes
  • offline

Message » 06 Sep 2005 14:25

Pareil..............
BOUTIN
 
Messages: 146
Inscription Forum: 06 Aoû 2005 10:46
Localisation: 78
  • offline

Message » 06 Sep 2005 18:00

Commercialisation en 2006....
Vous êtes sérieux là ???
Vous n'avez pas l'impression de vous emballer un peu vite sur une simple annonce de presse ?
Juste pour mémoire : la TNT, la télé HD, le blu ray, le DVD-HD... combien d'annonces jamais suivies d'effet ?
Alors ne soyez pas trop pressés...
zenon92
 
Messages: 975
Inscription Forum: 24 Fév 2005 0:55
  • offline


Retourner vers Ecrans HD

 
  • Articles en relation
    Dernier message