Modérateurs: Modération Forum Home-Cinéma, Le Bureau de l’Association HCFR • Utilisateurs parcourant ce forum: AlexB27, AxleM, Bello78, christophe98, cocogex, coucouse, Cyberdom, djmx, Edis, Google Adsense [Bot], Lobito94, Miky10, Patbon21500, Pilou57, polo2121, Poune, Singha29, Stream et 134 invités

Tous les lecteurs Multimédia intégrés type Media Center, Box opérateurs, NMT.
Règles du forum
Avant de poster, merci de prendre connaissance des règles du forum : à lire avant de poster

Mede8er MED500X (Realtek RTD1073)

Message » 19 Aoû 2011 22:58

Bonjour, quelqu'un arrive t'il à lire le contenu de son mac/iMac sous Lion depuis le Mede?
Sous snow leopard je n'avais aucun soucis mais là j'ai un problème avec une demande d'identification...

Merci
thieu93
 
Messages: 167
Inscription Forum: 29 Fév 2004 12:10
  • offline

Message » 19 Aoû 2011 23:38

thieu93 a écrit:Bonjour, quelqu'un arrive t'il à lire le contenu de son mac/iMac sous Lion depuis le Mede?
Sous snow leopard je n'avais aucun soucis mais là j'ai un problème avec une demande d'identification...

Merci

Lion n'utilise plus samba mais une version (proprio ?) modifiée qui est incompatible avec linux (donc la majorité des lecteurs multimédias).
MasterNoun
 
Messages: 133
Inscription Forum: 14 Avr 2010 21:14
  • offline

Message » 19 Aoû 2011 23:54

Grosse galère alors :-(
J'ai essayé PS3 media server, çà me permet de voir le contenu de mon iMac depuis ma neufbox mais impossible depuis le mede8er, étrange! :wtf:
thieu93
 
Messages: 167
Inscription Forum: 29 Fév 2004 12:10
  • offline

Message » 20 Aoû 2011 0:52

Faut utiliser NFS en attendant une solution.
Va voir sur le sujet du med500x2, on en parle un peu...
MasterNoun
 
Messages: 133
Inscription Forum: 14 Avr 2010 21:14
  • offline

Message » 20 Aoû 2011 8:23

Je pars en vacance sla mais en rentrant je n'y manquerais pas.
Merci
thieu93
 
Messages: 167
Inscription Forum: 29 Fév 2004 12:10
  • offline

Message » 25 Sep 2011 19:13

depuit le 20 aout plus personne ne repond ses normal
cobra789
 
Messages: 25
Inscription Forum: 05 Fév 2011 14:13
  • offline

Message » 28 Sep 2011 16:07

Salut à tous!

Avez-vous des soucis de décalage son/image?

je ne lis quasi que du MKV et je n'ai jamais eu de problème... je me suis mis dans le visionnage de séries, souvent en .avi .mpeg et j'ai constamment un décalage???
une idée d'où ça puisse venir? :wtf:
merci d'avance :wink:
tef-lutin
 
Messages: 434
Inscription Forum: 04 Aoû 2007 0:13
  • offline

Message » 17 Oct 2011 9:59

Bonjour,

Je me suis décidé à passer au dernier firmware vu que j'ai de plus en plus de mkv qui ne passent pas...

Par contre, bêtement, je n'avais pas noté ma config réseau :-?

Je ne sais plus quoi mettre sachant que j'étais à la base en adresse fixe dans le 500x et que le streaming avec mon pc marchait parfaitement...

Ma config :

PC sous XP Pro, adresse ip fixe 192.168.0.100
Seconde carte Ethernet dans ce même pc, ip fixe 192.168.0.11

Que dois-je mettre comme paramètres réseaux dans ma 500X pour qu'elle puisse voir mes répertoires partagés ?
humramos
 
Messages: 12
Inscription Forum: 23 Jan 2003 14:57
  • offline

Message » 19 Oct 2011 10:06

Salut,
Fonction "recherche dans ce post"
Regarde dans les posts précédents c'est déjà expliqué maintes fois.
Essaye ta recherche avec ça -> adresse IP
@+
phenixx
 
Messages: 115
Inscription Forum: 16 Mar 2005 0:05
Localisation: Chatillon (92)
  • offline

Message » 18 Nov 2011 1:28

bonjour

a quand un nouveau firmware ?

MERCI
aspsy
 
Messages: 137
Inscription Forum: 11 Oct 2005 23:47
  • offline

Message » 19 Nov 2011 14:50

aspsy a écrit:bonjour

a quand un nouveau firmware ?

MERCI


Maintenant :D
tef-lutin
 
Messages: 434
Inscription Forum: 04 Aoû 2007 0:13
  • offline

Message » 20 Nov 2011 1:41

tef-lutin a écrit:
aspsy a écrit:bonjour

a quand un nouveau firmware ?

MERCI


Maintenant :D



c est a dire ?
aspsy
 
Messages: 137
Inscription Forum: 11 Oct 2005 23:47
  • offline

Message » 20 Nov 2011 10:26

C'est à dire qu'un nouveau firmware vient de sortir

Finally :D The all new V2 Firmware that has been many many months in the making

The New V2 has lots of new functionality so its VERY IMPORTANT that you download and read the user manuals . This release does not have a working Transmission BT downloader so dont update if you have pending downloads that need completion. See note at the bottom for more info

IMPORTANT: ONLY INSTALL VIA EMERGENCY METHOD AND DO NOT USE CONFIG RESTORE
AFTER THE UPDATE WE SUGGEST YOU REBOOT THE X2 AND THEN CONTINUE

Emergency Method (Resets Configuration to Default)
Format USB stick to FAT32. Unzip the firmware and copy the Install.img to the root of the USB stick. Disconnect the power jack at the rear of the Mede8er then plug it back in - Now press the on/off button and hold it pressed for 20 seconds and then release. After approximately 15 seconds the LED on the Mede8er with flash blue and you will get a progress bar on your TV display (some TV's will not display this) wait until the Mede8er re boots itself +- 60 sec. Your Mede8er is now updated.

USER MANUALS
MED500X2
http://www.mede8er.com/images/USER_INST ... ov2011.pdf
MED450X2
http://www.mede8er.com/images/USER_INST ... er2011.pdf
MED400X2
http://www.mede8er.com/images/USER_INST ... 011cdr.pdf
TEASER DEMO
http://www.mede8er.com/demo/Mede8er_X2_ ... rmware.mp4


For those who do not have Y2M / Thumbgen xml data I suggest you download this demo to see the true power of the X2
Small Demo --- http://www.mede8er.org/artwork/temp/MED ... ersion.rar
Large Demo --- [Modéré - Article 3 et 5.2 de la charte]/3163525944

V2.0.0
http://www.mede8er.org/beta/Firmware_Fi ... ov2011.rar
http://www.mede8er.org/beta/Firmware_Fi ... ov2011.zip

ChangeLog -- v2.0.0
1. New V2 GUI
2. New Mede8er XML Movie Jukebox with 5 View Styles and Parental Control.
3. New User Customized Background function - User can use own background JPG images for GUI
4. New Skin function -- Users will be able to download community devleoped skins for X2
5. New Auto View Function
6. NEW -- Audio button shortcut to Audio Player 'Now Playing'
7. New customize GUI and SUBTITLE text based fonts (loaded into flash memory)
8. New Boot to Favourites function
9. Added support for PGS subtitles in MKV files
10 Added support for external vob/sub subtitles
11. Added Icelandic Launguge to GUI
12. Added Manual IP Setup for WiFi
13. Added HDD Size/Free Space added to Setup Menu
14. Fixed Internet Browser not displaying mouse curser
15 Fixed PCIe WiFi not booting up in conjuction with large size internal HDD
16. Fixed read NTFS only internal HDD
17. Fixed read issue on some HDD brands
18. Improved SRT subtitle image quality
19. Fixed external set sub with bracked extension after file name eg name[NL].srt or name.(NL).srt
20. Fixed limit of subtitles in one folder
21. Fixed SPDIF Passthrough when X2 does not have internal EDID info
22. Fixed crash caused by some characters in mp3 tag when doing a scan.
23. Fixed pause/play problem with DTSMA on some Pioneer Amp models
24. Fixed General Bugs and functionality
25. Fixed crash when opening BDISO with unsupported BD Menu

Transmission BT - Currently updating from V2.13 to V2.42 and this will be ready early next week. It must be noted that if you have pending downloads you should complete these first in V1.0.3 before updating as the new version uses different directories.

Investigating
1. Login to Picasa account
2. Vobsub not working if made with mkbmerge 4.9.1
3. LPCM - 6CH AAC Loosing Center channel when skipping forward/back

I would like to thank Hansen for his incredible work on this release. I would also like to thank Massbommel for his invaluable input and testing every night and every weekend ;). To Jer1956 and Insomniac I thank you for your input. To all the Mede8er Beta testers a huge thanks and I can tell you that you guys have helped to make V2 what it is.

Mede8er1

To unsubscribe from these announcements, login to the forum and uncheck "Receive forum announcements and important notifications by email." in your profile.

You can view the full announcement by following this link:

http://www.mede8erforum.com/index.php?topic=7045.0
tef-lutin
 
Messages: 434
Inscription Forum: 04 Aoû 2007 0:13
  • offline

Message » 20 Nov 2011 11:00

C'est un firmware pour le MED500X2, pas pour le MED500X...
:roll:
MasterNoun
 
Messages: 133
Inscription Forum: 14 Avr 2010 21:14
  • offline

Message » 20 Nov 2011 12:05

Oui c'est ce que j'ai vu après.... ooooh le boulet :oops:
tef-lutin
 
Messages: 434
Inscription Forum: 04 Aoû 2007 0:13
  • offline


Retourner vers Lecteurs et Box Multimedia

 
  • Articles en relation
    Dernier message