Modérateur: Le Bureau de l’Association HCFR • Utilisateurs parcourant ce forum: adrixn et 15 invités

Autant que possible, merci d'utiliser le formulaire pour rédiger votre annonce.
Règles du forum
Petites annonces pour Hauts-parleurs, Caisses, Boîtiers, Composants DIY.
La consultation est libre mais la publication est réservée aux Membres de l'Association : être inscrit sur le forum ne suffit pas.
Pour tout savoir sur la création et la gestion d'une annonce, penser à consulter la FAQ des PA !
Autant que possible, merci d'utiliser le formulaire pour rédiger votre annonce.

Tubes 12AX7 - JAN-GE 12AX7WA - JAN-GE 12AX7WA LP

Message » 15 Juil 2012 13:15

Bonjour,

Je vide un peu mes tiroirs.

J’ai donc 3 tubes 12AX7, jamais utilisé car tests jamais fais, à vendre. Les prix sont port inclus.

JAN-GE 12AX7WA

Image

The JAN-GE 12AX7WA tube is a prized vintage tube for both guitar and home audio amplifiers. The JAN-GE 12AX7-WA tube is warm and musical. It is a balanced and smooth sounding tube, making it a great choice for blues, jazz, and classic rock. For Fender tube amps, the JAN-GE 12AX7WA is a top pick.

Acheté 64$ vendu 20 €

JAN GE 12AX7 Longue Plate

Image


The JAN GE 12AX7 Long Plate has great low end and a much softer top than the more modern GE 12AX7. Find out why these GE are so sought after. All of our stock is from 1963.

Acheté 79$ vendu 30 €

Mullard 12AX7 / ECC83

Image

This new production 12AX7 / ECC83 tube is New Sensor's reissue of the famous Mullard 12AX7.

From our review: "Microphonics is not an issue despite the larger that average plate structure. The transconductance on my sample was the same as two NOS samples I measured. Not really high gain at all, but a real good noise floor and a nice smooth tone that doesn’t encourage ear fatigue the way some preamps can be."

The Mullard name and trademark have been acquired by the New Sensor Corporation. This new production Mullard 12AX7 tube is manufactured at their Xpo-Pul factory (also known as Reflektor) in Saratov, Russia. New Sensor is an American corporation and since taking ownership of this factory has been steadily improving the quality of current production tubes.

One other note about the construction of these tubes is they have filaments that are almost completely encased in the plate structure. They often don't "light up" when working properly. This is not a problem, it's normal for the reissue Mullard 12AX7 / ECC83.

Acheté 17$ vendu 10 €
Amra
Membre HCFR
Membre HCFR
 
Messages: 533
Inscription Forum: 02 Mar 2006 20:47
  • offline

Retourner vers Hauts-Parleurs et Composants DIY

 
  • Articles en relation
    Dernier message