Bonjour,
Le topic JBL pro est embouteillé et pas de réponse à ma question.
Chacun de mes 2 amplis (NAD2100) "voit" le 30cm sur une voie , et l'étage medium/tweeter sur l'autre voie.
Le réglage d'impédance de l'ampli est au choix , sur normal (4 ohm) ou sur 8 ohm.
Je mets sur quoi?
C'est pour des 4312 mKI
|
7 messages • Page 1 sur 1
|
Modérateurs: Modération Forum Haute-Fidélité, Le Bureau de l’Association HCFR • Utilisateurs parcourant ce forum: Deul, gallou50, jeano33, jps31, KeizerSauze, lawaz64, MIB91, sax.tenor, Snake75, yokosuza, yoyoman et 886 invités
Impédances medium+tweet et boomer sur JBL 4312
- mulanee
- Messages: 889
- Inscription Forum: 02 Déc 2007 13:39
- Localisation: France
Pourquoi tu écris "sur normal 4 ohms" ?
- dabass
- Messages: 3656
- Inscription Forum: 09 Juil 2007 0:14
Pourquoi tu écris "sur normal 4 ohms" ?
Ce n'est pas moi qui l'écrit , c'est NAD , je cite :
If you are not sure of the true impedance of your speakers and are using only one pair , leave the impedance switch at 4 ohm (normal).If you are using a single pair of speakers whose true impedance is above 6 ohm , you can maximise the power delivery by resetting the impedance switch to 8 ohm (high).
- mulanee
- Messages: 889
- Inscription Forum: 02 Déc 2007 13:39
- Localisation: France
C'est ceux-là ? http://manuals.harman.com/JBL/HOM/Techn ... I%20ts.pdf
La configuration dans mon profil
And the right will prevail, all our troubles shall be resolved
We have faith in the Lord, unless there's money or sex involved (Frail Grasp On The Big Picture)
-
Themisto - Membre HCFR
- Messages: 4649
- Inscription Forum: 16 Mai 2008 14:02
- Localisation: Montpellier
Non , celles là:
http://audio-database.com/JBL/speaker/4312-e.html
http://audio-database.com/JBL/speaker/4312-e.html
- mulanee
- Messages: 889
- Inscription Forum: 02 Déc 2007 13:39
- Localisation: France
Si tu ne trouves pas le manuel des enceintes, et si personne ne t'aide, je te propose d'essayer d'abord à 4ohms sur ton ampli.
Le manuel du NAD indique que tu ne peux le mettre sur 8ohms (high) que si tu es certain que ton enceinte ne tombe pas sous les 6ohms...
Le manuel du NAD indique que tu ne peux le mettre sur 8ohms (high) que si tu es certain que ton enceinte ne tombe pas sous les 6ohms...
La configuration dans mon profil
And the right will prevail, all our troubles shall be resolved
We have faith in the Lord, unless there's money or sex involved (Frail Grasp On The Big Picture)
-
Themisto - Membre HCFR
- Messages: 4649
- Inscription Forum: 16 Mai 2008 14:02
- Localisation: Montpellier
|
7 messages
• Page 1 sur 1
|