Modérateurs: Modération Forum Home-Cinéma, Le Bureau de l’Association HCFR • Utilisateurs parcourant ce forum: KALMAAA et 10 invités

Les Processeurs Vidéo (Scaler, Désentrelaceur, Enhancer) et tous les appareils traitant l'image (y compris les ampli HC)

Scalers Lumagen Radiance 20XX Darbee/CMS 729 points/UHD

Message » 04 Mar 2013 9:03

Pour accéder directement aux ressources pour le Radiance 2021, cliquez ICI
Pour accéder directement au dossier HCFR sur Radiance 2021, cliquez ICI


Nouvelle gamme de scaler Radiance.

Comme nous nous y attendions, Lumagen annonce 3 nouveaux Radiance dans la famille 20xx. En plus du 2021 nous aurons désormais le choix entre le 2022, le 2041 et le 2042.

Remarque: Lumagen a aussi parlé de la gamme 40xx qui serait compatible 2K/4K in et 2K/4K out mais je n'ai pas plus d'informations pour le moment.

Information donnée sur le site de lumagen: http://www.lumagen.com/testindex.php?module=news

Les produits sont déjà référencé sur le site Lumagen: http://www.lumagen.com/testindex.php?module=products

L'annonce officielle de Lumagen faite le 21/05/2013
Lumagen® Announces Three New Radiance™ Video Processors

Beaverton Oregon, May 21, 2013 – Today, Lumagen® is announcing the availability of the three additional Radiance™ 20XX family video processors. The first, the Radiance 2022, adds analog video inputs, and associated audio inputs, to the previously announced Radiance 2021. The Radiance 2022 has an input complement of four HDMI, two Component, two SVideo, and two Composite video, matching the RadianceXS-3D for video, and audio, I/O.

Lumagen is also introducing the Radiance 2041, and the Radiance 2042, which increase the maximum output rate to 4k at 30 Hertz for the Radiance 2021, and Radiance 2022, respectively.

All Radiance 20XX products include the video calibration and setup features of the award winning Radiance product line, along with integrated Darbee DVP™ technology. Setup and calibration features include 125-point linear-Gamma RGB color palette CMS, 21-point parametric gray-scale and Gamma, a host of setup features, Lumagen’s industry leading No-Ring™ scaling technology, and support for 3D scaling and conversion between 3D formats for displays and projectors that do not support all the common 3D formats

Lumagen’s president Jim Peterson stated, "Our customers have been asking us for a product that they can use to drive their 4k displays and projectors at their native 4k rate so they can use Lumagen’s reference quality NoRing™ scaling to convert standard and high definition sources to 4k. With the introduction of these new products, the Radiance family can now support this request."

The USA suggested retail pricing is $3295, $3495, and $3995 for the Radiance 2022, Radiance 2041, and Radiance 2042, respectively.
For further information email sales@lumagen.com, call 503-574-2211, or visit http://www.lumagen.com.

About Lumagen
Lumagen provides solutions for video switching, calibration, processing and scaling. Together these features allow knowledgeable integrators and enthusiasts to enable the best quality, and most accurate, video images available. Lumagen is a privately held video systems product company founded in September of 2001. It is headquartered in Beaverton, Oregon, USA.

About DarbeeVision
DarbeeVision Inc. was founded by Paul Darbee and Larry Pace to commercialize system products, discrete hardware, and embedded solutions based on Darbee Visual Presence Technology. DarbeeVision is offering its Darbee Visual Presence technology for consumer electronics product integrations. The privately held company is headquartered in Santa Ana, California, USA. For information call 657-600-8241, email info@darbeevision.com, or visit http://www.DarbeeVision.com.


Image

Image

Image
Dernière édition par alex_t le 21 Sep 2013 9:01, édité 2 fois.
alex_t
Membre HCFR Contributeur
Membre HCFR Contributeur
 
Messages: 10852
Inscription Forum: 29 Oct 2005 23:04
Localisation: Ile-de-France, 77
  • offline

Message » 04 Mar 2013 9:04

La famille 20xx : 4 produits

Voir le site Lumagen pour la description détaillée: http://www.lumagen.com/testindex.php?module=products

ATTENTION: Tous les matériels ne sont pas compatibles 4K.

Elle se divise en 2 types de modèle : 202x (2K in - 2K out) et 204x (2K in - 2K/4K out):

Radiance 2021 : 2K in - 2K out + 3D
Entrées: 4 x HDMI 1.4 1080P (2K)
Sorties: 2 x hdmi 1.4 1080P (2K) et 1 sortie SPDIF coaxiale
Contrôle: IR + 1xRS232
Disponible

Radiance 2041 : 2K in - 2K/4k out + 3D
comme le 2021 avec (si j'ai bien saisi) l'upscale 4K en sortie.
Entrées: 4 x HDMI 1.4 1080P (2K)
Sorties: 2 x hdmi compatibles 2K et 4K (@30Hz) et 1 sortie SPDIF coaxiale
Contrôle: IR + 1xRS232
Disponibilité annoncée

Radiance 2022 : 2K in - 2K out + 3D
Même nombre d'entrées/sorties que le Radiance XS actuel.
Entrées et sorties compatibles uniquement 2K
Disponibilité annoncée

Radiance 2042 : 2K in - 2K/4k out + 3D
comme le 2022 mais avec sortie 2K et 4K (@30Hz)
Disponibilité annoncée

gordon@convergentav a écrit:Le prix de vente recommandé pour ces unités dans l'Union européenne est

2021 £ 1995 € 2295
2022 £ 2295 € 2650
2041 £ 2450 € 2850
2042 £ 2750 € 3195

Ce sont juste prix suggéré. Pour la tarification réelle "rue" au moment de l'achat s'il vous plaît contactez votre revendeur. Le ci-dessus comprennent les taxes de vente dans l'UE, mais excluent expédition.
alex_t
Membre HCFR Contributeur
Membre HCFR Contributeur
 
Messages: 10852
Inscription Forum: 29 Oct 2005 23:04
Localisation: Ile-de-France, 77
  • offline

Message » 04 Mar 2013 9:04

Radiance 2021

Basé sur la famille Radiance actuelle en terme de processing vidéo, le Radiance 2021 intègre désormais la technologie Darbee Visual Presence.

Prix annoncé pour l'Europe via l'importateur officiel convergent-av.co.uk : 1995£ (GBP) soit environ au 5 mars 2013, 2300 euros (son site n'est pas à jour mais l'info vient bien de lui voir ce message plus-bas)

Disponible en commande.

Image

Image

Image

Image

Image

Image


Le dossier HCFR sur le Radiance 2021
Cliquez ICI

Manuel utilisateur et brochure commercial
La version papier fait parti des accessoires livrés avec le Radiance. Téléchargeable en cliquant ICI.
Brochure commerciale (merci à Gordon :) ): Radiance 2021


Problèmes connus
- aucun pour le moment

Outils de configuration
Pour importer ou exporter votre configuration. Très utile pour partager votre config ou remonter un bug à Lumagen.

>>> Radiance_configv1_5 <<<

Firmware
Téléchargement: http://www.lumagen.com/testindex.php?mo ... XX_updates
Comment mettre à jour le Radiance: Tip 6- Updating the Radiance
Les mises à jour sont cumulatives. Le dernier firmware contient donc toutes les corrections ou évolutions des firmwares plus anciens.

Production 052613- Unified update for all 20XX units (2021,2022,2041,2042). No changes from rev052513 so no need to update if you're on that revision.


Production 052513- Adds optional fine adjustment of Darbee gain. Adds a copy option to the Enhancements copy menu. Update time ~15 minutes @57k.


Production 042313- Bugfix for genlock issue which could sometimes cause screen tear or flip eyes for framepacked 3D. Update time ~3 minutes @57k.


Production 042113- Bugfix for framepacked 3D input with Side-by-Side 3D output and 2.35 input aspect. Fix for using film mode with interlaced sources. Update time ~15 minutes @57k.


Production 041013- Bugfix for issue with video being disabled and showing as "HDCP off". Fix for 480i->1080p24. Fix for Darbee splitscreen mode not working correctly. Fix for auto input selection not working correctly. Improved audio handling. Update time ~15 minutes @57k.


Production 031813- Corrections and improvements for scaling and video mode detection issues. Darbee processing moved in video pipeline to allow for greater impact when applied to SD and 720p sources. Bugfix for 1080i output. Bugfix to allow for 2048 pixel width output mode. Bugfix for menu shortcuts "Menu 16", "Menu 17", "Menu 18". Added "Menu 19" menu shortcut for Darbee. Fix for HBR audio displaying as 2 Channel. Adds ability to program R/L arrow keys on remote rather than R arrow only being dedicated to Darbee quick menu (setting is in menu under Other: I/O Setup: Remote Ctl). Note this update takes longer to perform than the previous three (~14 min vs. ~2.5 min when running updater at 56K).

Production 031013- Bugfix for Darbee settings being incorrect when pressing right arrow to bring up the quick access Darbee menu.

Production 030913- Bugfix for audio initialization issue. Bugfix for video output with some displays enabling 3D incorrectly.

Production 030813- Bugfix for input EDID not working correctly (can cause a variety of problems like not being allowed to play 3D or not being able to determine audio formats).

Production 030713- Initial release for the Radiance 2021.


L'annonce officielle faite par Jim Peterson président de Lumagen, source : Forum Lumagen
jim_peterson a écrit:PRESS ANNOUNCEMENT
For Immediate Release

Lumagen® announces the first Radiance™ Video Processor with integrated Darbee Visual Presence™ Technology

Beaverton Oregon, March 4, 2013 Today, Lumagen® announced the availability of the first Radiance™ video processor with integrated Darbee Visual Presence™ (DVP™) technology. The Radiance 2021™ includes all the video calibration and setup features of the award winning Radiance product line, with the addition of DVP™ technology.

Lumagen's president Jim Peterson stated, "Darbee Visual Presence is a great fit for our video processor product line, which includes the CEA™ 2010 Platinum award winner for Video Product of the Year, the RadianceXE™. We are always working to improve the video quality available to our customers and see Darbee as a great way to add value to our products."

Larry Pace, DarbeeVision's President, stated "Lumagen's award winning products have consistently earned a reputation for enabling a superior video entertainment experience. Their very popular Radiance video processor line delivers cutting edge technologies, making them a natural fit to partner with DarbeeVision. DarbeeVision's proprietary technology takes video images to the next level of reality for the home theater. Darbee uses a unique and patented approach to deliver extremely lifelike images that make the original image seem dull and flat by comparison, and so is a fitting addition to the Lumagen Radiance product line."

The Radiance 2021 supports four HDMI inputs, plus two HDMI outputs and a COAX audio output, in a 17 inch "1U" rack mountable case. Similar in input and output capability to the RadianceXS-3D, the Radiance 2021, by eliminating analog video inputs, is a nod to the all-digital theater that is becoming common in the industry. It supports input and output rates of up to 1080p60. The Radiance 2021 includes all the calibration, setup and processing features of the industry leading RadianceXS-3D video processor, such as 125-point linear-Gamma RGB color palette CMS, 21-point parametric gray-scale and Gamma, a host of setup features, Lumagen's industry leading No-Ring™ scaling technology, and support for 3D scaling and conversion between 3D formats for displays and projectors that do not support all the common 3D formats. The Radiance 2021 has a USA suggested retail price of $2795.

The Radiance Altera® Field Programmable Gate Array (FPGA) based architecture has maintained its industry leading position due to its ability to add new architectural features in the field, long after purchase, by updating the FPGA program. The Altera Cyclone II™ FPGA allowed Radiance products to introduce frequent software updates that have included a number of hardware algorithm improvements. Among these are 3D scaling and calibration, and the new 125-point Linear-Gamma RGB CMS. The Radiance 2021 is the next step forward in this architecture. By using the Altera Stratix III™ technology to increase both performance and available FPGA resources Lumagen was able to add the DVP™ technology to the Radiance 2021, while maintaining all current RadianceXS-3D video processing features.

About Lumagen
Lumagen provides solutions for video switching, calibration, processing and scaling. Together these features allow knowledgeable integrators and enthusiasts to enable the best quality, and most accurate, video images available. Lumagen is a privately held video systems product company founded in September of 2001. It is headquartered in Beaverton, Oregon, USA. For further information email sales@lumagen.com, call 503-574-2211, or visit http://www.lumagen.com.

About DarbeeVision
DarbeeVision Inc. was founded by Paul Darbee and Larry Pace to commercialize system products, discrete hardware, and embedded solutions based on Darbee Visual Presence Technology. DarbeeVision is offering its Darbee Visual Presence technology for consumer electronics product integrations. The privately held company is headquartered in Santa Ana, California, USA. For information call 657-600-8241, email info@darbeevision.com, or visit http://www.DarbeeVision.com.

# # #

Lumagen is a registered trademark, and Radiance is a trademark, of Lumagen, Inc. Darbee™ and DarbeeVision™ are trademarks of DarbeeVision Inc. Other trademarks are the property of their respective owners.
alex_t
Membre HCFR Contributeur
Membre HCFR Contributeur
 
Messages: 10852
Inscription Forum: 29 Oct 2005 23:04
Localisation: Ile-de-France, 77
  • offline

Message » 04 Mar 2013 9:04

Réservé
alex_t
Membre HCFR Contributeur
Membre HCFR Contributeur
 
Messages: 10852
Inscription Forum: 29 Oct 2005 23:04
Localisation: Ile-de-France, 77
  • offline

Message » 04 Mar 2013 9:05

Réservé
alex_t
Membre HCFR Contributeur
Membre HCFR Contributeur
 
Messages: 10852
Inscription Forum: 29 Oct 2005 23:04
Localisation: Ile-de-France, 77
  • offline

Message » 04 Mar 2013 9:43

Infos techniques sur le FPGA ALTERA utilisé par Lumagen sur leur nouveau processeur vidéo :
http://www.altera.com/devices/fpga/stra ... -index.jsp
http://www.altera.com/devices/fpga/stra ... mance.html
Tron
 
Messages: 1860
Inscription Forum: 02 Déc 2002 18:39
Localisation: 44
  • offline

Message » 04 Mar 2013 10:17

Si l'association Darbee + DNR de Lumagen est concluante, je saute dessus.
Le prix annoncé est de $2795. Le prix actuel de l'XS 3D est de $2249.
Si je comprends bien le nouveau FGPA Altera III vient en plus de l'ancien FGPA, et a été implémenté spécialement pour la fonction "Darbee".
La question est de savoir si c'est juste une simple absorption de la techno Darbee ou est-ce que Lumagen a poussé le vis plus loin en optimisant son intégration.
La description faite me laisse penser à une simple absorption de la techno pour le moment. Certain revendeurs proposent même un bundle XS 3D + Darbee
Mas nul doute que Lumagen avec leur assiduité à proposer des mises à jour régulières nous réservera de belles surprises :wink:

Quid de l'évolution possible (upgrade hard ou soft) de cette version vers le 4K ?...
Adhara
 
Messages: 7833
Inscription Forum: 12 Jan 2009 22:29
Localisation: 26
  • offline

Message » 04 Mar 2013 10:35

OK Voici quelque chose que je ne m'attendais pas. Comme vous le savez Lumagen ont travaillé sur un scaler nouveau super. 4K en entrée et de sortie ainsi que Darbee traitement. Je devais avoir une unité de démonstration de matériel maintenant, mais il n'est pas encore arrivé. Eh bien, aujourd'hui, j'ai découvert pourquoi. Il semble Lumagen décidé que le temps qu'il faudrait pour amener à la production serait trop long sans aucun dispositif intermédiaire nouveau, donc ils ont passé les deux derniers mois, l'élaboration d'une mise à jour de mi-vie pour une partie de la gamme Radiance actuelle. Ces nouvelles unités requièrent pas de tests bêta ils espèrent car ils sont basés sur la technologie Radiance actuel (contrairement à une grande partie de la nouvelle scaler super) ils doivent être bon d'aller sur le portail. Ils l'ont gardé sous leur chapeau.

Mini3D continue comme périphérique d'entrée de gamme sans avoir l'intention de mettre à jour ou remplacer, comme le fait la XE3D.

Il y aura quatre nouveaux produits en deux versions matérielles. Chaque matériel sera disponible avec 2K (1080P) ou de sortie 4K. Les entrées / sorties de ces unités matérielles sont les suivantes. Seule l'unité d'abord, le Radiance 2021 est d'être rendue publique pour le moment.

Radiance 2021, 4 x HDMI, 2 x hdmi spdif out ainsi que sur le contrôle et RS232. Cette option est disponible pour commander maintenant. UE SRP £ 1995, contactez votre revendeur pour spéciale pré-commande prix

Radiance 2041, comme ci-dessus avec une capacité de production 4K. Le matériel est testé mais les unités ne sont pas disponibles pendant quelques semaines sans doute que le logiciel doit être finalisé

Radiance 2022, Matériel selon XS circulants autres que seulement 1 RS232 Pas encore annoncé, pas de disponibilité pour le moment.

Radiance 2042, comme ci-dessus avec sortie 4K .. Pas encore annoncé, pas de disponibilité pour le moment.

La série 2xx1 aura comme traitement des dossiers XS pour unifier les coûts d'emballage et d'expédition. Toutes les unités feront tous les trucs en 3D les unités actuelles font. Ils auront traitement Darbee en eux. Ce sera comme les améliorations pouvant être sauvegardés en cours sur une résolution par sous et par base de mémoire d'entrée. Ces unités seront pas émis 1080i et il est à espérer, mais pas promis, ils finiront avec un plus grand 3DLUT pour les étalonnages.

Le détartreur ultra sera après Pâques, je pense. Il aura la désignation
Radiance 4045 ou quelque chose comme ça .... 4K c'est à dire dans les 4K et le 5 ... eh bien, vous allez découvrir ... aucune idée des coûts finaux sur elle, mais attendons plus de courant XE ....

Il ne sera pas possible de mettre à jour 2K sur des dispositifs à l'état 4K.
gordon@convergentav
Pro-Commercant
Pro-Commercant
 
Messages: 75
Inscription Forum: 05 Juil 2012 15:26
  • offline

Message » 04 Mar 2013 10:40

attached product file
Radiance_2021_Brochure_030313.pdf
gordon@convergentav
Pro-Commercant
Pro-Commercant
 
Messages: 75
Inscription Forum: 05 Juil 2012 15:26
  • offline

Message » 04 Mar 2013 10:54

Merci Gordon !!
Donc le 2021 serait juste un modèle intermédiaire (XS 3D actuel + Darbee) non upgradable vers le 4K.
Les "vraies nouveautés" sont donc les 2041 et 2042 et le future 4045.

Donc pour résumé (à corriger si non correct):

2021 = XS 3D + Darbee
2041 = XS 3D + Darbee + 4K (upscale 4K ?).
2022 = Mini 3D + Darbee ?
2042 = Mini 3D + Darbee + 4 K (upscale 4K ?).
4045 = XE 3D + Darbee + 4K
Adhara
 
Messages: 7833
Inscription Forum: 12 Jan 2009 22:29
Localisation: 26
  • offline

Message » 04 Mar 2013 11:09

Non, je crains que vous avez mal compris ..

Il n'ya pas de remplacement pour MINI3D. Il contniues que l'unité la plus abordable et ne sera pas mis à jour avec le traitement Darbee.

2021 est PAS UNE XS.

2021 est, dans un cas qui ressemble XS, mais a 4HDMI IN, OUT 2 HDMI et 1 RS232. Il n'a pas d'entrées analogiques ou audio. Il s'agit d'un produit entièrement nouveau. Je ne sais pas si elle a commutation transparente comme le XS et XF, mais je m'attends à ce qu'il ne sera plus, et comme la commutation dans mini3D. 2021 sera la plus affordavle de ces nouveaux dispositifs. Tous les autres seront plus chers.

2041 est le même que ci-dessus mais avec une sortie 4K.

2022 AND 2042 sont les unités qui sont basés sur XS actuelles. Ce sont les versions 2K et 4K d'un "Darbee'd" XS.
gordon@convergentav
Pro-Commercant
Pro-Commercant
 
Messages: 75
Inscription Forum: 05 Juil 2012 15:26
  • offline

Message » 04 Mar 2013 11:10

4045 n'est pas basée sur la gamme Radiance actuelle. Il s'agit d'un produit entièrement nouveau matériel.
gordon@convergentav
Pro-Commercant
Pro-Commercant
 
Messages: 75
Inscription Forum: 05 Juil 2012 15:26
  • offline

Message » 04 Mar 2013 11:34

gordon@convergentav a écrit:Non, je crains que vous avez mal compris ..

Il n'ya pas de remplacement pour MINI3D. Il contniues que l'unité la plus abordable et ne sera pas mis à jour avec le traitement Darbee.

2021 est PAS UNE XS.

2021 est, dans un cas qui ressemble XS, mais a 4HDMI IN, OUT 2 HDMI et 1 RS232. Il n'a pas d'entrées analogiques ou audio. Il s'agit d'un produit entièrement nouveau. Je ne sais pas si elle a commutation transparente comme le XS et XF, mais je m'attends à ce qu'il ne sera plus, et comme la commutation dans mini3D. 2021 sera la plus affordavle de ces nouveaux dispositifs. Tous les autres seront plus chers.

2041 est le même que ci-dessus mais avec une sortie 4K.

2022 AND 2042 sont les unités qui sont basés sur XS actuelles. Ce sont les versions 2K et 4K d'un "Darbee'd" XS.


Hello Gordon. Thanks.

Do you know if the 20xx family is based on the VXP technology ?
alex_t
Membre HCFR Contributeur
Membre HCFR Contributeur
 
Messages: 10852
Inscription Forum: 29 Oct 2005 23:04
Localisation: Ile-de-France, 77
  • offline

Message » 04 Mar 2013 11:36

Tron a écrit:Infos techniques sur le FPGA ALTERA utilisé par Lumagen sur leur nouveau processeur vidéo :
http://www.altera.com/devices/fpga/stra ... -index.jsp
http://www.altera.com/devices/fpga/stra ... mance.html


Merci :)

J'entends un peu que les choses s'éclaircissent puis je mettrais toutes les info utiles (comme celle-ci ;) ) dans les 1er posts.
alex_t
Membre HCFR Contributeur
Membre HCFR Contributeur
 
Messages: 10852
Inscription Forum: 29 Oct 2005 23:04
Localisation: Ile-de-France, 77
  • offline

Message » 04 Mar 2013 11:56

Le 4045 va être distribué en beta ? Car si c'est une nouvelle architecture, cela risque de prendre du temps avant que ce soit bien maitrisé et stable.
deuch
Membre HCFR
Membre HCFR
 
Messages: 5802
Inscription Forum: 08 Mai 2000 2:00
Localisation: Paris
  • offline


Retourner vers Processeurs Vidéo

 
  • Articles en relation
    Dernier message