Modérateurs: Le CA de l’Association HCFR, Modération Forum Home-Cinéma • Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 16 invités

Lecteurs et platines vidéo (lecteurs DVD, HD-DVD, Dvdscopes, Laserdiscs, etc.)

platine de salon compatible WMV9

Message » 10 Jan 2004 21:09

S@lut à tous ! ! :lol:

Si on regarde les specs du Bravo D3, on peut lire que :
....The Bravo D3 is one of the first DVD players capable of playing MPEG2, MPEG4 and WMV9 in high definition. Audiodecoding includes WMA9, WMA Pro, WMA lossless, Dolby Digital, MP3.....

Alors que sur l'arrière train, point de sortie 5+1 ???? :o :roll:

@+
Dernière édition par OO7livier le 31 Jan 2004 14:16, édité 1 fois.

La configuration dans mon profil


Vous appréciez HCFR ? Adhérez à l'Association HCFR pour financer son hébergement.
Le forum HCFR existe parce que les cotisations des membres de l'Association HCFR le financent.
Avatar de l’utilisateur
OO7livier
Modération Home-Cinema & Rencontres
Modération Home-Cinema & Rencontres
 
Messages: 18395
Inscription Forum: 21 Nov 2002 14:32
Localisation: Sept-Huit ! !
  • offline

Message » 29 Jan 2004 23:58

S@lut à tous ! ! :lol:

Qqun a t'il des nouvelles sur la sortie de ce type de platine ?? :o
On semblait dire mai aux USA ! !

@+

La configuration dans mon profil


Vous appréciez HCFR ? Adhérez à l'Association HCFR pour financer son hébergement.
Le forum HCFR existe parce que les cotisations des membres de l'Association HCFR le financent.
Avatar de l’utilisateur
OO7livier
Modération Home-Cinema & Rencontres
Modération Home-Cinema & Rencontres
 
Messages: 18395
Inscription Forum: 21 Nov 2002 14:32
Localisation: Sept-Huit ! !
  • offline

Message » 04 Fév 2004 0:11

Pahlawan a écrit:S@lut à tous ! ! :lol:

Qqun a t'il des nouvelles sur la sortie de ce type de platine ?? :o
On semblait dire mai aux USA ! !

@+


Des niouses, des niouses, des niouses ! ! :lol:

@+
OO7livier.

La configuration dans mon profil


Vous appréciez HCFR ? Adhérez à l'Association HCFR pour financer son hébergement.
Le forum HCFR existe parce que les cotisations des membres de l'Association HCFR le financent.
Avatar de l’utilisateur
OO7livier
Modération Home-Cinema & Rencontres
Modération Home-Cinema & Rencontres
 
Messages: 18395
Inscription Forum: 21 Nov 2002 14:32
Localisation: Sept-Huit ! !
  • offline

Message » 04 Fév 2004 0:31

Pahlawan a écrit:
Pahlawan a écrit:S@lut à tous ! ! :lol:

Qqun a t'il des nouvelles sur la sortie de ce type de platine ?? :o
On semblait dire mai aux USA ! !

@+


Des niouses, des niouses, des niouses ! ! :lol:

@+
OO7livier.


Franchement, il n'y a pas le feu au lac, quand on voit l'offre de titres actuels en HD (sauf quelques exceptions) : il n'y a qu'à voir les samples : des images en HD, certes, mais vieilles de presque 15 ans pour certaines (les trucs tournés en IMAX pour projection sur écran sphérique). Celui décrochant le pompon : speed_720.wmv :lol: musique de daube des années fin 70, je ne parle même pas des tenues de ski des deux skieurs lol: :lol: :lol: :lol:

S.
stephane999
 
Messages: 587
Inscription Forum: 06 Juin 2002 11:06
Localisation: Compiègne
  • offline

Message » 19 Fév 2004 15:35

Je profite des liens pour redonner l'info : Qui dit lecture des fichiers WM9 ne dit pas lecture des fichiers HD WM9.

La nuance est importante je pense. 8)
Austin
 
Messages: 9434
Inscription Forum: 08 Oct 2000 2:00
Localisation: 92, France
  • offline

Message » 19 Fév 2004 16:08

Oui Austin, trés juste, de même d'ailleur entre le "HD DVD" entre High Density DVD et High Definition DVD ;)

--Patrice

La configuration dans mon profil


Adherez à l'association HCFR pour que le site vive et reste indépendant... HCFR for ever...
laric
Membre d'Honneur - Webmaster
Membre d'Honneur - Webmaster
 
Messages: 25443
Inscription Forum: 19 Juil 2000 22:13
Localisation: Nîmes
  • offline

Message » 19 Fév 2004 22:05

kiss va proposer une platine wm9, mais cela veut dire qu'elle ne sera pas compatible HD WM9? je comprend pas la difference vu que sur pc wm9 lit la hd, pourquoi une platine wm9 ne pourrait pas le faire aussi?
http://www.clubic.com/n/n11643.html
Daigoro
 
Messages: 10876
Inscription Forum: 16 Mai 2003 22:57
Localisation: Le Havre
  • offline

Message » 20 Fév 2004 19:11

Austin a écrit:Je profite des liens pour redonner l'info : Qui dit lecture des fichiers WM9 ne dit pas lecture des fichiers HD WM9.

La nuance est importante je pense. 8)


Pour moi c'est clair qu'il y aura lecture des fichiers HD WMV9!:

V INC. ANNOUNCES BRAVO HD DVD PLAYER WITH WINDOWS MEDIA VIDEO 9 AND HIGHMAT PLAYBACK

V Inc. Bravo D3 Home HD DVD Media Player is First to Announce Support for High Definition WMV9 and HighMAT Formatted Playback Powered by Sigma Design’s New EM8620L Single Solution on-chip Processor with REALmagic HD Decoding and Processing
Windows Media Video 9 Provides Better Compression for Streaming and Storing Content with Full Digital Rights Management Protection for HD Content FOUNTAIN VALLEY, CA. and LAS VEGAS, NV (CES) – January 6, 2004 - V Inc., the multiple award-winning digital display maker, today announced the first high definition DVD player with Windows Media Video 9 and HighMAT formatted playback. Powered by Sigma Design’s (Nasdaq: SIGM) EM8620L on-chip processor, the Bravo D3 also provides pure perfect DVD playback via DVI output in high-resolution 480p, 1080i and 720p formats. Expected to ship in Q’2 2004 with a target retail of $349.99, the Bravo D3 is consistent with V Inc.’s mission to bring practical technological innovation to consumer electronics products while maintaining operational simplicity and value.

The Bravo D3 will also include DVD-R/RW, DVD+R/RW, CD, CD-R/RW playback. The Bravo D3 is the first DVD player capable of playing MPEG2, MPEG4 and WMV9 in High Definition. Audio decoding includes WMA9, WMA Pro, WMA lossless, Dolby Digital, MP3, MPEG-1/2 (layers 1, 2, and 3) and MPEG-4 AAC. The player supports Dolby Digital and DTS® multi-channel audio pass-through on Toslink optical and S/PDIF coaxial digital outputs. The player features NTSC/PAL output in composite and S-Video formats with interlaced or progressive component video output in 480i, 480p, 1080i, 720p and user-definable linear and non-linear resolutions.

Any form of decoded content can be output in a direct digital DVI-HDTV video RGB format

keeping the display free from analog conversion artifacts. Beyond the normal decoding of content, the player will offer REALmagic scaling and scan conversion with appropriate 3:2 pull down, advanced display processing including, programmable linear and non-linear scaling, a 5-plane video mixer, adaptive de-interlacing, adaptive flicker filtering and pixel-based alpha mixing - all free of annoying interlaced chroma problems. The player’s component video output will be limited to 480p on playback of DVD content when CSS copy protection is found. The player’s DVD drive and processor will be second to none with transparent layer changes and a convenient zoom function for non-anamorphic content rendering.

“We’re extremely pleased with our successor to the popular Bravo D1. By integrating Windows Media Video 9 decoding, the Bravo D3 continues our goal of making more high definition content readily available for HDTVs,” stated William Wang, CEO of V Inc.

The Sigma Designs EM8620L Media Processor

The new EM8620L media processor from Sigma Designs provides a complete single-chip solution for IP video set-top boxes, DVD receivers and DVD players. The EM8620L offers a wide range of media processing functions for video decoding, audio decoding, and graphics processing based on REALmagic HD technology, for the highest quality image possible on high definition displays. For single-chip systems, it features an on-chip RISC processor, PCI-bus IDE controller and additional peripheral ports for supporting other subsystems. Configured with standard front-end components, the EM8620L provides a full-featured solution for advanced set-top appliances.

“As the demand for more ubiquitous video along with high-definition features continues to increase, the popularity of new advanced CODECS such as Microsoft’s Windows Media 9 Series will no doubt rise,” said Ken Lowe, VP of strategic marketing of Sigma Designs. “At this point, we are seeing substantial momentum towards the use of Windows Media Video 9 for IP video solutions that can deliver high-quality video streaming, as well as DVD players such as V Inc.’s Bravo D3 that can accept the widening range of video formats.”

About Windows Media Video 9 and HighMAT Formatting

The entertainment industry is examining technologies such as Windows Media 9 Series, which provides better compression efficiency for streaming and storing digital media content and supports full digital rights management protection, where it was previously not possible. Driven primarily by increased compression efficiency, network providers can now offer a new range of high-quality, high-resolution video services over bandwidth-limited networks. Additionally, with both published DVD and user-created content beginning to appear, WMV9 support looms on the horizon as the new must-have feature for enthusiasts buying DVD players. These DVD players will be able to read and navigate a mixture of video, audio, and image content created using the new HighMAT format, a standard established jointly by Matshushita and Microsoft.

The Windows Media Video HD format of a “Terminator 2” bonus DVD from Artisan studios in June of 2003 was the first evidence of an underlying movement to deliver a large number of titles encoded in HD. Concurrently, the amount of compelling downloadable and streaming video content is also building up rapidly, and can be accessed from Web-sites such as at CinemaNow, iFilm, Movielink, Movie Magix, netcine, SkyPerfecTV, WOWOW and BMWfilms.com. Aside from commercially available content, Windows Movie Maker 2, Microsoft’s easy to use video editing feature of Windows XP, is another tool that’s providing consumers with loads of home movies.

About Sigma Designs, Inc.

Sigma Designs (Nasdaq: SIGM) specializes in silicon-based MPEG decoding for streaming video, progressive DVD playback, and advanced digital set-top boxes. The company’s award-winning REALmagic® Video Streaming Technology is used in both commercial and consumer applications providing highly integrated solutions for high-quality decoding of MPEG-1, MPEG-2 and MPEG-4. Headquartered in Milpitas, Calif., the company also has sales offices in China, Europe, Hong Kong, Japan, Korea and Taiwan. For more information, please visit the company’s web site at www.sigmadesigns.com.

About V Inc.

V Inc., “Where Vision Meets Value,” headquartered in Fountain Valley, California, is a leading edge digital technology company. Within months after its launch, the brand won numerous product awards from leading print and online publications. Founded by William Wang, a leader in the computer display industry, V Inc. is bringing vision to the consumer electronics market through practical innovation. V Inc. products offer customers the most advanced technologies at the most affordable value. Products now include the Vizio and Velite lines of plasma, LCD and DLP EDTV/HDTV displays, along with Bravo DVD and HDTV set top solutions. For more information, please call 714-962-4848 or visit them on the web at vinc.com.

The V name and symbol are registered trademarks of V Inc. All other trademarks may be the property of their respective holders.

Source: V Inc.
mermoz
 
Messages: 811
Inscription Forum: 20 Nov 2003 8:15
  • offline

Message » 20 Fév 2004 20:23

mxav a écrit:kiss va proposer une platine wm9, mais cela veut dire qu'elle ne sera pas compatible HD WM9? je comprend pas la difference vu que sur pc wm9 lit la hd, pourquoi une platine wm9 ne pourrait pas le faire aussi?
http://www.clubic.com/n/n11643.html


Lire un fichier WM9 de 240*120 avec un débit de 500kb/s est plus facile qu'un fichier en 1280*720 à 6Mb/s, il serait incorrect de croire que parce qu'une platine lit le format WM9, elle lit forcément la HD WM9, pas le même débit, pas les même résolutions, et surtout protection des données.


Mermoz, effectivement la Bravo semble pouvoir les lire, même s'ils ne précisent pas comment sera gérer les DRM.
En tout cas à ce niveau de prix ils risquent de rafler la première vague d'acheteur. :roll:
Austin
 
Messages: 9434
Inscription Forum: 08 Oct 2000 2:00
Localisation: 92, France
  • offline

Message » 20 Fév 2004 21:48

A bravo du Bravo D3, sait-on s'il pourra sortir 50 Hz sur sa sortie DVI pour les sources 50 Hz en entrée ?
Sinon pas de 576P en DVI ?
LaurentG
 
Messages: 4873
Inscription Forum: 31 Aoû 1999 2:00
  • offline

Message » 20 Fév 2004 21:53

moins de 400 dollars, dispo en 2004 vivement les précommandes !
Daigoro
 
Messages: 10876
Inscription Forum: 16 Mai 2003 22:57
Localisation: Le Havre
  • offline

Message » 20 Fév 2004 22:51

mxav a écrit:moins de 400 dollars, dispo en 2004 vivement les précommandes !


C'est distribué en France Bravo ? :roll:
Austin
 
Messages: 9434
Inscription Forum: 08 Oct 2000 2:00
Localisation: 92, France
  • offline

Message » 20 Fév 2004 23:12

ce n'est plus vraiment un pb la distribution ! juste un surcout
Daigoro
 
Messages: 10876
Inscription Forum: 16 Mai 2003 22:57
Localisation: Le Havre
  • offline

Message » 21 Fév 2004 6:17

Austin, pourquoi t'obstines-tu à questionner les capabilités du Bravo à décoder de la HD en WM9, alors que c'est explicité une dizaine de fois sur la news... :roll:
Le plus grand interêt d'ajouter le décodage WM9 à un lecteur DVD, c'est bel et bien la HD, non?
peezee
 
Messages: 1944
Inscription Forum: 26 Sep 2003 16:11
Localisation: Paris
  • offline

Message » 21 Fév 2004 8:12

LaurentG a écrit:A bravo du Bravo D3, sait-on s'il pourra sortir 50 Hz sur sa sortie DVI pour les sources 50 Hz en entrée ?
Sinon pas de 576P en DVI ?


A priori non, mais quel intérêt lorsque l'on peut sortir du 720p, voire du 1080p, avec des sources HD pour lesquelles il est conçu ? A moins peut-être qu'il ne soit customisable comme son frère ainé le D1:

How can I change the DVI output to a format other than 480P, 720P, 1080i or 852x480?

You need to update your firmware to a July 2003 or later version to allow customization of the DVI output. Follow the Firmware link to download the new firmware and the Firmware Flash Instructions. Please read the instructions before burning a CD and updating the firmware. The default output for DVI Custom Setting is 1024x768 @ 75Hz.


Quant à sa puce Sigma, tous les espoirs sont permis:

For DVI users, you'll also be able to select video or graphics RGB levels and adjust the video gamma and black level stretching (if any), OSD/graphics gamma, chromaticity correction (SD vs HD), color temperature, timing, brightness, contrast, saturation, hue, etc. independent of the analog video outputs. Deinterlacing also has an additional mode that takes advantage of the multiple fields of data being present.

1366x768p is also now one of the standard resolutions our chips will support. I've learned a lot from eveyone here and tried to incorporate it into the new chips... :-)
__________________
Keith Jack
Sigma Designs
mermoz
 
Messages: 811
Inscription Forum: 20 Nov 2003 8:15
  • offline


Retourner vers Lecteurs DVD / HD-DVD / Laser Disque

 
  • Articles en relation
    Dernier message