J'ouvre ce topic car voici des enceintes qui semblent avoir un excellent rapport qualité prix et qui méritent d'être connues.
Je possède depuis environ 1 mois 2 ERD-1 en guise de surrounds, et 3 ERM 6.3 doivent arriver fin de semaine prochaine pour compléter mon ensemble. Tout cela pour remplacer un ensemble KLIPSCH (RF35, RC35 et RS35).
Les ERD-1 offre un multitude de réglages en fonction de vos goûts d'écoute et surtout de leur position dans la pièce. J'ai paramétré les miennes en Dipôle et le rendu est fort sympathique.
Présentation des produits :
La gamme complète :
- Les colonnes ERT 8.3
Sans grille
Avec grille
Le bornier et ses réglages
Les caractéristiques :
•Two 8" Woofers, Two 5.25" woofers, one 25mm tweeter
•Sensitivity:
89db (2.83volts @ 1 Meter)
•Recommended amplifier power:
50-500 Watts RMS
•Frequency response: 45hz-20Khz +/-2db
•Weight:
80 lbs (boxed)
•Selectable switches:
1. Tweeter control - Set to ' -2' to cut tweeter level 2db, set to '+2' to boost tweeter level 2db. Leave at '0' for reference level.
2. Midrange control - Set to ' -2' to cut tweeter level 2db, set to '+2' to boost tweeter level 2db. Leave at '0' for reference level.
3. Boundary compensation - In 'On' position, the bass EQ slope changes to compensate for 'booming' sound that may come from being close to a wall or piece of furniture. In 'Off' position, the bass EQ remains unaffected.
(There is no 'right' or 'wrong' settings for these switches. They are simply there to allow you to fine tune the sound of the speakers to your room or your personal taste.)
•Size:
Unboxed: 10" wide x 43.75" high 13.25" deep, including feet (42.5" high without feet)
Boxed: 15" wide x 47" high x 18" deep
FEATURES:
•8" woofers sealed inside a secondary, isolated chamber for increased bass response.
•Boundary compensation, tweeter and midrange controls to fine tune the speakers to your listening environment.
•Adjustable 3-position silver billet aluminum outriggers for maximum stability.
•Non-reflective magnetic grills.
- Les ERM 6.3 (centrale ou configuration LCR)
Sans grille
Avec grille
Le bornier et ses réglages
Les caractéristiques :
•Two 6.5" Woofers, Two 4" woofers, one 25mm tweeter
•Sensitivity:
89db (2.83volts @ 1 Meter)
•Recommended amplifier power:
50-350 Watts RMS
•Frequency response: 80hz-20Khz +/-2db
•Weight:
43.5 lbs (boxed)
•Selectable switches:
1. Tweeter control - Set to ' -2' to cut tweeter level 2db, set to '+2' to boost tweeter level 2db. Leave at '0' for reference level.
2. Midrange control - Set to ' -2' to cut tweeter level 2db, set to '+2' to boost tweeter level 2db. Leave at '0' for reference level.
3. Boundary compensation - In 'On' position, the bass EQ slope changes to compensate for 'booming' sound that may come from being close to a wall or piece of furniture. In 'Off' position, the bass EQ remains unaffected.
(There is no 'right' or 'wrong' settings for these switches. They are simply there to allow you to fine tune the sound of the speakers to your room or your personal taste.)
•Size:
Unboxed: 8.5" wide x 26" high x 9.5" deep
Boxed: 14.25" wide x 31.5" high x 30.25" deep
•Offset array with optimized horizontal and vertical polar response. Speaker can be mounted vertically for left or right main channels, or horizontally as a center channel.
- Les ERM 6.2 (centrale ou configuration LCR)
Sans grille
Avec grille
Le bornier et ses réglages
Les caractéristiques :
•Two 6.5" Woofers, one 25mm tweeter
•Sensitivity:
89db (2.83volts @ 1 Meter)
•Recommended amplifier power:
50-250 Watts RMS
•Frequency response: 80hz-20Khz +/-2db
•Weight:
32 lbs (boxed)
•Size:
Unboxed: 9.25" wide x 16" high x 11" deep
Boxed: 14" wide x 21" high x 16" deep
- Les ERD-1 (surround/surround back)
Sans grille
Avec grille
Le bornier et ses réglages
Les caractéristiques :
•One 5.25" Woofer, two 25mm tweeters
•Sensitivity:
89db (2.83volts @ 1 Meter)
•Recommended amplifier power:
50-200 Watts RMS
•Frequency response: 80hz-20Khz +/-2db
•Weight:
29.5 lbs pair (boxed) - 11 lbs. each (unboxed)
•Selectable switches:
1. Left/Right Bipole
2. Left Dipole
3. Right Dipole
4. Left/Right Inverted Dipole
(read more about Bipole/Dipole settings in the ERM-1/ERD-1 manual)
•Size:
Unboxed (each): 13" wide x 9.5" high x 4.25" deep
Boxed (pair): 14" wide x 14" high x 17" deep
Manuel d'utilisation des enceintes :
http://emotiva.com/manuals/ERT_ERM_ERD_manual.pdf
Les subwoofers n'ont pas été abordés car ils sont en 120 V (normes US, donc transfo obligatoire).
A vos commentaires....
