Bien!!
Très intéressant tout cela, mais n'y a t il que la solution IR??
Pas de solution RF type Logitech avec sa souris et son clavier??
J'ai ouï dire que la télécommande RC871 (ou RC5000 du DENON AVCA1SE) pouvait piloter au choix en IR ou en RF...
Et hop, je relance le sujet
Gibus
|
24 messages • Accèder à une page • 1, 2
|
Modérateurs: Modération Forum DIY, Modération Forum Installations, Le Bureau de l’Association HCFR • Utilisateurs parcourant ce forum: Bing [Bot], Dagda, Kro, petitangexx, Ragnarsson, tracerbox, vince62126 et 126 invités
Réalisation d'une télécommande complète de HC
- Gibus
- Messages: 501
- Inscription Forum: 05 Sep 2001 2:00
- Localisation: avignon,France puis Toulouse
Girder peut gérer des évènements clavier. Tout système compatible clavier pourra donc fonctionner. L'IR, ce n'est pas si mal, c'est fiable, la portée est bonne (j'ai une souris radio, elle décroche bien avant la souris IR intégrée à mon clavier ACER) : alors pourquoi se faire du mal ?
- frounzie
- Messages: 208
- Inscription Forum: 06 Sep 2001 2:00
- Localisation: Metz
Yes en effet t'as p'tet raison. en plus la réponse de Denon vient de tomber:
et la voici:
Thank you for your e-mail regarding Denon Products.
The RC-871 is the Remote control which is sold with
the AVC-A1SE in the UK, this device is only capable
of IR codes only. The software that can be downloaded
from the web can be used with the RC-871 is designed
for the USA version RC-8000 this is RF.
Because of the allocated Military frequency in the
UK we cannot use RF in this country.
Regards
Keith Pradey
donc c'est du IR point.
Où je peux trouver le récepteur qui va bien à ton avis??
Gibus
et la voici:
Thank you for your e-mail regarding Denon Products.
The RC-871 is the Remote control which is sold with
the AVC-A1SE in the UK, this device is only capable
of IR codes only. The software that can be downloaded
from the web can be used with the RC-871 is designed
for the USA version RC-8000 this is RF.
Because of the allocated Military frequency in the
UK we cannot use RF in this country.
Regards
Keith Pradey
donc c'est du IR point.
Où je peux trouver le récepteur qui va bien à ton avis??
Gibus
- Gibus
- Messages: 501
- Inscription Forum: 05 Sep 2001 2:00
- Localisation: avignon,France puis Toulouse
- aldo
- Pro-Fabricant
- Messages: 24638
- Inscription Forum: 25 Déc 2001 2:00
- Localisation: Landes dans le 4 zero!
C'est dispo à l'adresse suivante et livré en quelques jours pour environ 50€ :
http://www.evation.com
Salut
François
http://www.evation.com
Salut
François
- frounzie
- Messages: 208
- Inscription Forum: 06 Sep 2001 2:00
- Localisation: Metz
... et désolé pour le retard !
- frounzie
- Messages: 208
- Inscription Forum: 06 Sep 2001 2:00
- Localisation: Metz
- aldo
- Pro-Fabricant
- Messages: 24638
- Inscription Forum: 25 Déc 2001 2:00
- Localisation: Landes dans le 4 zero!
[img]http://www.ifrance.com/frenchclone1/Assistant.gif[img]
- aldo
- Pro-Fabricant
- Messages: 24638
- Inscription Forum: 25 Déc 2001 2:00
- Localisation: Landes dans le 4 zero!
pôur essai
- aldo
- Pro-Fabricant
- Messages: 24638
- Inscription Forum: 25 Déc 2001 2:00
- Localisation: Landes dans le 4 zero!
|
24 messages
• Page 2 sur 2 • 1, 2
Retourner vers Discussions Générales
|