Modérateurs: Staff Home-Cinéma, Staff Juridique • Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 9 invités

Tout ce qui concerne les logiciels lié au HC sur ordinateur (PC, Mac, Linux...)
Règles du forum
Avant de poster, merci de prendre connaissance des règles du forum : à lire avant de poster

Le TOPIC de MadVR (v0.90.24)

Message » 11 Juin 2011 18:54

De plus en plus utilisé, le render MadVR est à la mode :D
Il a la particularité de travailler en hard, c'est la carte graphique qui est utilisée et non le processeur.
Il sert à upscaler ou downscaler l'image comme le fait le resize de FFDSHOW

Je propose de créer un topic où l'on ne parlerait que de ce render afin d'éviter de chercher des informations le concernant un peu de partout.




Voici la dernière version: http://madshi.net/madVR.zip

Voici le forum doom9: http://forum.doom9.org/showthread.php?t=146228

Upgrade: Dézipper le fichier MadVR.rar au même endroit où est installée la version précédente et remplacer tous les fichiers.

madVR avec les DVD: http://www.homecinema-hd.com/faire-fonc ... s-212.html

Exemple de configuration: https://imouto.my/madvr/




*** NOUVELLE VERSION v0.90.24 ***

madVR v0.90.24

* HDR: improved tone mapping algorithm
* HDR: added gamut mapping compression (instead of clipping)
* HDR: slightly improved luminance vs saturation reduction formula
* HDR: added options to use an external HDR tone mapping 3dlut
* HDR: added option to do HDR processing, but still output PQ
* fixed: measuring HDR luminance + NNEDI3 chroma upscaling sometimes crashed
* compiled OpenCL kernels are now stored separately for 32bit and 64bit
* when using the "ShowRenderSteps" tweak, a smaller OSD font is used now





madVR v0.90.23
* updated AdaptiveSharpen to version 2016-07-10
* custom output levels can now be adjusted in 0.25 steps
* HDR: added option to define how to handle too bright & saturated pixels
* fixed: HDR luminance measurements + chroma SuperRes produced green screen
* fixed: #420: chroma was doubled despite being below scaling factor threshold

madVR v0.90.22
* added Shiandow's new (Cross) Bilateral chroma upscaler version
* optimized black bar detection performance, should now also work for 4K 60p
* removed Anti-Bloating for SuperRes, because it didn't really help
* fixed: mixed x/y SSIM2D downscaling produced green screen
* fixed: doubling decision was based on window size instead of video size
* fixed: HDR peak luminance of 120/180 nits negatively affected SDR playback
* fixed: HDR "measure each frame's peak luminance" froze with Intel/NVidia
* fixed: HDR compressed/clipped highlights were ever so slightly too saturated
* HDR: disabled HDR processing now disables 3dlut, color and gamma tweaks
* HDR: improved quality for 120 and 180 nits
* HDR: file "DisableHdrBrightnessTweak" disables 1xx nits special handling

madVR v0.90.21
* HDR: pixels between 0-100 nits are now left untouched (if possible)
* HDR: improved desaturation algorithms to reduce hue shift even further
* HDR: added option to choose between clipping and tone mapping
* HDR: added option for hue preservation quality
* HDR: added option to restore detail in compressed regions
* HDR: added option to measure each video frame's peak luminance
* HDR: added option to completely disable HDR processing
* HDR: added workaround for files with invalid metadata
* fixed: supersampling + 2D SSIM sometimes produced "green" video

madVR v0.90.20
* tweaked deringing algorithm some more
* added workaround for weird crash with latest AMD beta drivers

madVR v0.90.19
* fixed: image doubling was sometimes activated although it shouldn't
* deringing strength was slightly increased
* deringing artifacts were slightly reduced
* deringing now adds some grain to deringed image areas

madVR v0.90.18
* added new deringing algorithm
* added dering key shortcut and file name tag ("dering(ing)=on/off/half/full")
* fixed: upscaling refinement wasn't always active when doing supersampling
* fixed: Jinc upscaling was replaced by Lanczos3 when upscaling in only X or Y
* fixed: some graphical corruption when combining NNEDI3 + SSIM2D + Anti-Bloat
* fixed: image was too bright with linear light down- and sigmoidal upscaling
* fixed: sometimes HDR SMPTE 2086 metadata got lost

v0.90.17:
* added a couple of image doubling super-xbr anti-bloating options
* fixed: "relaxed" vs "strict" option wasn't properly hidden for upscaling

v0.90.16

* added adjustable anti-bloating filter for sharpening
* added adjustable anti-bloating filter for SSIM downscaling
* added adjustable anti-bloating filter for SuperRes
* added anti-ringing filter for SuperRes
* added Hyllian's super-xbr anti-ringing (for image doubling)
* reworked super-xbr chroma upscaling anti-ringing algorithms
* improved sharpen anti-ringing filter
* sharpen anti-ringing filter now also includes AdaptiveSharpen
* changed SSIM anti-ringing method
* added "relaxed" vs "strict (soft)" option for downscale anti-ringing
* "crispen edges" now tries to avoid amplifying grain & noise
* reduced some "crispen edges" aliasing problems
* added separate image doubling supersampling option
* added trade quality option "scale chroma separately if it saves performance"
* increased AdaptiveSharpen max value from 1.5 to 3.0
* increased "thin edges" max value from 4.0 to 8.0
* previously optional DX11 "alternative glitch handling mode" is now always on
* multiple profile groups can now share the same keyboard shortcut
* double clicking tray icon now opens "best" settings instead of always local
* fixed: Jinc/SSIM 2D downscaling was sometimes activated when not needed
* fixed: 4-taps Spline was broken
* fixed: some problems with 3D side-by-side and line/column alternative
* fixed: 10bit content could make DXVA scaling fail
* fixed: bitmap subtitles were not always moved up when cropping black bars
* fixed: when downscaling, some chroma algos were used although they shouldn't
* fixed: sometimes media player froze during DVD playback
* fixed: source black/white adjustments + gamma processing: wrong order
* fixed: rare shutdown crash when using native DXVA decoding
* fixed: OSD bug when playing BT.709 HDR content

v0.90.15:
* fixed: "creating shader file failed" (introduced in v0.90.14)

v0.90.14:
* fixed: using NNEDI3 sometimes resulted in black screen or crash
* fixed: 3D playback resulted in stuttering after about 1 hour of playback
* fixed: non-frame-packed 3D had scaling errors when using odd window sizes
* small performance improvement for non-frame-packed 3D rendering
* log file now never exceeds 512MB space, old log data is discarded if needed

v0.90.13:
* added support for finding the right 3D depth for the active subtitle track
* added "use alternative glitch handling mode" option for D3D11 presentation
* added a workaround for glitch problems with shaky 3D GPU drivers
* fixed: downscaling sometimes crashed, when not using SSIM
* fixed: Intel GPU always used DXVA scaling when DXVA deint/decode was active
* fixed: SSIM AR eventually left some resources open

v0.90.12:
* fixed: OSD and subtitles went black when using error diffusion
* fixed: subtitle depth was always set to 4, even for 2D subtitles

v0.90.11:
* added support for receiving 3D subtitle depth from splitter
* added support for rendering subtitles and OSD at a specific 3D depth
* added ISubRenderCallback4 interface to allow ISR to render 3D subtitles
* downscaling anti-ringing filter is now much more agressive
* removed integrated anti-ringing filter from "crispen/sharpen edges"
* added optional external anti-ringing filter for ringing sharpening algos
* re-added experimental "linear light" option for "crispen edges"
* image doubling can now be forced on (if no scaling is done otherwise)
* added 25%, 50%, 75%, 100% strength option to SSIM downscaling
* fixed: MPC-HC ISR subtitles didn't work in 3D mode
* fixed: 3D rendering with Bilinear downscaling wasn't really using Bilinear

v0.90.9:
* slightly improved SSIM quality (even stronger detail reconstruction)
* removed SSimDetailed option, now SSimClean is always used
* removed "use 1.6 gamma instead of 2.2" option
* fixed: moving media player to another monitor resulted in paused playback
* fixed: rendering eventually left some D3D interfaces open
* fixed: madVR shutdown memory leak
* fixed: some problems with live TV (detected by DVBViewer devs)
* fixed: 1080p23 was forced even when not using "auto" (frame packing)

v0.90.8
* fixed: downscaling "a lot" on some GPUs/drivers produced nearest neighbor
* fixed: NNEDI3 doubling + SSIM downscaling could result in green tint

v0.90.7
* fixed: banding when using linear light downscaling (introduced in v0.90.5)
* fixed: some problems when moving madVR to a different monitor
* fixed: OSD display bug when using different scaling algos for X and Y

v0.90.6
* fixed: linear light SuperRes processing got broken in v0.90.5
* fixed: SuperRes chroma processing was broken in certain situations

v0.90.5
* fixed: some SSIM downscaling related bugs
* added SSIM "detailed" and "clean" variants
* added Bicubic "sharpness: 125" option
* added "use 1.6 gamma instead of 2.2" option to linear light downscaling
* improved linear/sigmoidal light up and down scaling performance
* improved downscaling performance when using linear light
* SSIM downscaling can now also be used after image doubling
* fixed: settings dialog sometimes forget to remember Bicubic150 being set

madVR v0.90.4
* added Bicubic "sharpness: 150" option (useful for downscaling)
* added Shiandow's SSIM downscaling algorithm
* optimized Direct3D initialization order for 3D playback
* rendering no longer waits for OpenCL or DirectCompute to initialize
* fixed: AMD x64 GPU driver crash (added a workaround, not my fault!)
* fixed: interlaced output resulted in wrong refresh rate detected
* fixed: switching windowed -> FSE with D3D11 could result in black screen
* fixed: screenshots with "use a separate device for DXVA" sometimes failed
* fixed: incoming 4:2:2 content with odd video resolution crashed
* fixed: minor timing issue with D3D11 presentation
* fixed: OSD stopped working when no new frames came from decoder
* fixed: one potential settings dialog crash
* added IMadVRCommand::SendCommandDouble("keepLastFrameOnStop")
* added IMadVRCommand::SendCommandDouble("emptyQueue")
* last video frame is now remembered for 2 seconds when stopping graph
* added "EC_VIDEO_SIZE_CHANGED" information to "mvrInterfaces.h"

v0.90.3
* frame packed 3D: display mode is now always changed to 1080p23
* frame packed 3D: smooth motion FRC is now always off
* 3D: side-by-side quality is improved (proper scaling instead of Bilinear)
* 3D: added top-and-bottom, line alternative and column alternative modes
* 3D: added "swap left / right eye" option
* profile rules: added "3D" boolean variable
* profile rules: added "+", "-", "*", "/", ":" math support
* profile rules: number fields can now be used on both equation sides

v0.90.2
* fixed: directly entering 3D fullscreen exclusive mode failed
* fixed: trying to do 10bit playback stopped 3D from working
* fixed: D3D11 presentation sometimes got stuck (minimized, Aero Peak etc)
* fixed: LAV reporting double frame rate was ignored
* added 3D content information to OSD, e.g. "NV12, 8bit, 4:2:0 (3D)"
* added 3D presentation information to OSD, e.g. "D3D11 exclusive (3D)"
* 3D playback now always uses 1080p23 display mode
* disabled refresh rate fix logic for 3D presentation (just to be safe)

madVR v0.90.1
* fixed: DXVA processing was broken on some GPUs
* fixed: DXVA upscaling option was grayed out
* fixed: chroma SuperRes fracked up HDR colors
* fixed: LAV reporting YCgCo was misinterpreted by madVR
* fixed: "Reconstruction" was reported by the OSD to be "Jinc"

madVR v0.90.0
* added support for 3D decoders (IMediaSample3D)
* added support for 3D frame packed playback via HDMI 1.4+ (requires win8.1+)
* added support for native 10bit 4:2:0 DXVA decoding (+ scaling)
* added "Reconstruction" chroma upsampling algorithm (replaces NEDI option)
* updated SuperRes algorithm for chroma upscaling
* replaced luma upscaling "linear light" with "sigmoidal light" option
* sharpen edges is now ever so slightly brighter than before
* updated AdaptiveSharpen to version 2016-01-07
* fixed: D3D11 presentation crashed NVidia driver if 3D vision was enabled
* if DCI-P3 3dlut isn't selected, BT.2020 3dlut is used instead (if available)
* if BT.2020 3dlut isn't selected, DCI-P3 3dlut is used instead (if available)









L'idée est de centraliser vos expériences sur ce MadVR et de nous aider à comprendre les changements des différentes upgrade.

:wink:
Dernière édition par kbil69 le 24 Avr 2014 18:51, édité 73 fois.
Ecran: 3m 2.35 transonore Reference 4K+WB / VP: HC6000 / Préamp: Nakamichi 7.1 / Amplis: Yamaha 2*P2500S-P5000S-P7000S/ Source: PCHC
/ Egaliseur: Behringer DCX2496 / Enceintes: 7 GKF Eva-Sat avec surrounds doublées/ Caissons: 2*JBL 4645C
kbil69
Staff Installations
Staff Installations
 
Messages: 37030
Inscription: 09 Nov 2003 1:52
Localisation: 69
  • offline

Annonce

Message par Google » 11 Juin 2011 18:54

Publicite

 
Encart supprimé pour les membres HCFR

Message » 11 Juin 2011 18:56

Une fois la video lancée avec MPC-HC, clique droit et filtres puis sur madvR Renderer
Image


On a la version ainsi que l'onglet pour aller dans les options sur Edit Settings:
Image
Dernière édition par kbil69 le 12 Juin 2011 9:44, édité 4 fois.
Ecran: 3m 2.35 transonore Reference 4K+WB / VP: HC6000 / Préamp: Nakamichi 7.1 / Amplis: Yamaha 2*P2500S-P5000S-P7000S/ Source: PCHC
/ Egaliseur: Behringer DCX2496 / Enceintes: 7 GKF Eva-Sat avec surrounds doublées/ Caissons: 2*JBL 4645C
kbil69
Staff Installations
Staff Installations
 
Messages: 37030
Inscription: 09 Nov 2003 1:52
Localisation: 69
  • offline

Message » 11 Juin 2011 18:56

On apperçoit 3 volets:
DEVICES: (ceci concerne le diffuseur)
Image

identification:
Image

propriétés:
Image

calibration:
Image

mode d'affichage:
Image

couleur et gamma:
Image
Dernière édition par kbil69 le 03 Mar 2012 12:40, édité 4 fois.
Ecran: 3m 2.35 transonore Reference 4K+WB / VP: HC6000 / Préamp: Nakamichi 7.1 / Amplis: Yamaha 2*P2500S-P5000S-P7000S/ Source: PCHC
/ Egaliseur: Behringer DCX2496 / Enceintes: 7 GKF Eva-Sat avec surrounds doublées/ Caissons: 2*JBL 4645C
kbil69
Staff Installations
Staff Installations
 
Messages: 37030
Inscription: 09 Nov 2003 1:52
Localisation: 69
  • offline

Message » 11 Juin 2011 18:56

2ème volet:
PROCESSING

decoding:
Image

deinterlacing:
Image

----------------------------------------------------------------------------------------------------------------------------

3ème volet:
SCALING ALGORITHMS

chroma upscaling: (ici on laisse d'origine)
Image

luma upscaling: (j'utilise le SPLINE avec TAPS 4)
Image

luma downscaling: (j'utilise le SPLINE avec TAPS 4)
Image
Dernière édition par kbil69 le 03 Mar 2012 12:42, édité 7 fois.
Ecran: 3m 2.35 transonore Reference 4K+WB / VP: HC6000 / Préamp: Nakamichi 7.1 / Amplis: Yamaha 2*P2500S-P5000S-P7000S/ Source: PCHC
/ Egaliseur: Behringer DCX2496 / Enceintes: 7 GKF Eva-Sat avec surrounds doublées/ Caissons: 2*JBL 4645C
kbil69
Staff Installations
Staff Installations
 
Messages: 37030
Inscription: 09 Nov 2003 1:52
Localisation: 69
  • offline

Message » 11 Juin 2011 18:56

4ème volet:

RENDERING:

general settings:
Image

windowed mode settings:
Image

exclusive mode settings:
Image

trade quality for performance:
Image
Dernière édition par kbil69 le 03 Mar 2012 12:46, édité 2 fois.
Ecran: 3m 2.35 transonore Reference 4K+WB / VP: HC6000 / Préamp: Nakamichi 7.1 / Amplis: Yamaha 2*P2500S-P5000S-P7000S/ Source: PCHC
/ Egaliseur: Behringer DCX2496 / Enceintes: 7 GKF Eva-Sat avec surrounds doublées/ Caissons: 2*JBL 4645C
kbil69
Staff Installations
Staff Installations
 
Messages: 37030
Inscription: 09 Nov 2003 1:52
Localisation: 69
  • offline

Message » 11 Juin 2011 20:07

Le but de ce post est de remplir correctement les fenêtres en comprenant pourquoi/ou/comment régler ces paramètres ...

:wink:
Ecran: 3m 2.35 transonore Reference 4K+WB / VP: HC6000 / Préamp: Nakamichi 7.1 / Amplis: Yamaha 2*P2500S-P5000S-P7000S/ Source: PCHC
/ Egaliseur: Behringer DCX2496 / Enceintes: 7 GKF Eva-Sat avec surrounds doublées/ Caissons: 2*JBL 4645C
kbil69
Staff Installations
Staff Installations
 
Messages: 37030
Inscription: 09 Nov 2003 1:52
Localisation: 69
  • offline

Message » 12 Juin 2011 0:12

Merci a toi de partager ça :wink:
Projo: Sony HW50ES Source: PCHC Kaz VII Amplification: 2 Harman Kardon Signature 1.3 Enceintes 5.0: Pio S81 Nas: Syno DS413
Cables secteur & vidéo: Supra Cables audio: Piqachu Galileo 238
le shad
 
Messages: 3139
Inscription: 03 Sep 2005 14:52
Localisation: Bordeaux
  • offline

Message » 12 Juin 2011 7:53

Pour moi, il est toujours impossible de se servir de MadVR sur des DVD (mode fichiers sur Disque dur). La lecture ne se lance pas et MPC m'indique un problème de macrovisison. Il se lance parfaitement sur un MKV ou un Blu Ray...

- Windows7 32
- Media Player Classic Home cinéma dernière version
- MadVR dernière version
- ATI 4350 pilotes à jour...

J'ai toujours pas trouvé la solution (à priori, je ne suis pas le seul), les versions passent, le problème reste...

Pacal.
-
Le Breizhou
 
Messages: 128
Inscription: 18 Oct 2006 18:31
  • offline

Message » 12 Juin 2011 9:38

Le Breizhou a écrit:Pour moi, il est toujours impossible de se servir de MadVR sur des DVD (mode fichiers sur Disque dur). La lecture ne se lance pas et MPC m'indique un problème de macrovisison. Il se lance parfaitement sur un MKV ou un Blu Ray...

- Windows7 32
- Media Player Classic Home cinéma dernière version
- MadVR dernière version
- ATI 4350 pilotes à jour...

J'ai toujours pas trouvé la solution (à priori, je ne suis pas le seul), les versions passent, le problème reste...

Pacal.
-


La solution pour la protection Macrovision a été donné ici:

http://www.homecinema-hd.com/faire-fonc ... s-212.html

Pour lire les DVD , j'ai trouvé cette astuce qui ne fonctionne qu'avec l' HAALI média splitter :il suffit de lancer la lecture a partir du premier fichier VOB du film soit VTS_01_1 ,je ne sais par quel mystère de l'informatique, les autres fichiers suivent dans l'ordre et jusque la fin et avec en prime la barre de navigation
mobomambo
 
Messages: 160
Inscription: 14 Juil 2007 19:05
Localisation: LIEGE
  • offline

Message » 12 Juin 2011 9:46

Je rejoute cela :wink:
Ecran: 3m 2.35 transonore Reference 4K+WB / VP: HC6000 / Préamp: Nakamichi 7.1 / Amplis: Yamaha 2*P2500S-P5000S-P7000S/ Source: PCHC
/ Egaliseur: Behringer DCX2496 / Enceintes: 7 GKF Eva-Sat avec surrounds doublées/ Caissons: 2*JBL 4645C
kbil69
Staff Installations
Staff Installations
 
Messages: 37030
Inscription: 09 Nov 2003 1:52
Localisation: 69
  • offline

Message » 12 Juin 2011 9:50

Très bonne idée ce topic,
Guy59
 
Messages: 884
Inscription: 04 Mar 2007 17:13
Localisation: Nord
  • offline

Message » 12 Juin 2011 10:13

Quelques questions qui doivent être importantes pour la chaine video:

1) Dans le volet "devices" -> "propriétés", on peut choisir 16-235 ou 0-255, ce réglage se positionne où dans la chaine video ? Cela fait doublon avec le RGB CONVERSION de FFDSHOW ?

2) Dans le volet "devices" -> "calibration", on règle comment ?

3) Dans le volet "devices" -> "calibration", on peut choisir BT601 ou BT709, cela fait doublon avec le RGB CONVERSION de FFDSHOW ? Je suppose qu'on met BT709 avec la HD.

4) Dans le volet "devices" -> "color & gamma", on peut régler le gamma, comment cela se comporte dans la chaine video ?


Je pense que c'est important pour le souligner :wink:
Ecran: 3m 2.35 transonore Reference 4K+WB / VP: HC6000 / Préamp: Nakamichi 7.1 / Amplis: Yamaha 2*P2500S-P5000S-P7000S/ Source: PCHC
/ Egaliseur: Behringer DCX2496 / Enceintes: 7 GKF Eva-Sat avec surrounds doublées/ Caissons: 2*JBL 4645C
kbil69
Staff Installations
Staff Installations
 
Messages: 37030
Inscription: 09 Nov 2003 1:52
Localisation: 69
  • offline

Message » 12 Juin 2011 10:42

Jeremy33 où es tu?! :mdr:
Projo: Sony HW50ES Source: PCHC Kaz VII Amplification: 2 Harman Kardon Signature 1.3 Enceintes 5.0: Pio S81 Nas: Syno DS413
Cables secteur & vidéo: Supra Cables audio: Piqachu Galileo 238
le shad
 
Messages: 3139
Inscription: 03 Sep 2005 14:52
Localisation: Bordeaux
  • offline

Message » 12 Juin 2011 10:56

1/ Je crois que madvr intervient à la fin de la chaine et que le fait de l'avoir sélectionné désactive la conversion YV12<RGB du fait que dans outpout on a mis seulement YV12.
2/ Tu règles en fonction de ton diffuseur, non ?
3/ Itou que 1/
4/ A voir avec les drivers des ATI par exemple...et si on a un écran déjà calibré ?
Guy59
 
Messages: 884
Inscription: 04 Mar 2007 17:13
Localisation: Nord
  • offline

Message » 12 Juin 2011 11:59

Salut à tous, très bonne idée que ce topic sur (le mystérieux ?) madvr

Après différents test, il m'est impossible d'utiliser l'algo spline de madvr (j'ai un IGGP H67) ; aurai-je un intérêt à utiliser le resize de ffdshow tout en choisissant tout de même madvr comme renderer ? (aucune saccades ainsi mais un piquet de l'image un poil trop prononcé...mais qui dois pouvoir je pense se corriger)
Cdt,
indy
Chipset graphique Intel H67 / Ecran samsung led UE46C6000
Ampli Marantz NR1501 / Kit 5.1 Boston accoustic soundware XS
indyhelp
 
Messages: 108
Inscription: 10 Juin 2011 14:36
  • offline



Retourner vers Logiciel PC Home-cinéma

 
  • Articles en relation
    Dernier message