Pioneer G9 et ControlCAL (ISF & Menu Service)

[ControlCAL]

those are patterns i used!!

Do you have Powersave Mode disabled or enabled?

I was actually able to reproduce your gamma compression while using the power save modes in conjunction with ISF-Day. Very weird results if I might say.

[couloun]

those are patterns i used!!

Do you have Powersave Mode disabled or enabled?

I was actually able to reproduce your gamma compression while using the power save modes in conjunction with ISF-Day. Very weird results if I might say.

it is disabled!

[ControlCAL]

I guess I have to read back in this Thread..

What issue are you seeing, bad gamma, low light output etc..?

I think you said you are using Display 2 and CalMAN and AVS HD 709.. perhaps you need to post settings and CalMAN reports/graphs in a new Thread here:

http://www.controlcal.com/forum/forumdisplay.php?f=49

[couloun]

I guess I have to read back in this Thread..

What issue are you seeing, bad gamma, low light output etc..?

I think you said you are using Display 2 and CalMAN and AVS HD 709.. perhaps you need to post settings and CalMAN reports/graphs in a new Thread here:

http://www.controlcal.com/forum/forumdisplay.php?f=49

i'm using i1 pro calman/hcfr avs, hd 709/dve blu ray.

i'm seeing for a increase of white luminance value!!actually i have around 165-166 for it.I would like to increase this value!!

[ControlCAL]

ahh, please do post settings and CalMAN reports (I gave a link above)..

Please convert to fL for light output..

Also, what model, LX-5090H/6090H, KRP-A, KRP-M???

[couloun]

ahh, please do post settings and CalMAN reports (I gave a link above)..

Please convert to fL for light output..

Also, what model, LX-5090H/6090H, KRP-A, KRP-M???

it's a lx 5090h model, and i post my settings and reports later
Y for 100ire 166 cd/m^2

[ControlCAL]

ahh, please do post settings and CalMAN reports (I gave a link above)..

Please convert to fL for light output..

Also, what model, LX-5090H/6090H, KRP-A, KRP-M???

it's a lx 5090h model, and i post my settings and reports later
Y for 100ire 166 cd/m^2

haha, that's pretty good 48.4 fL..

for some reason, I thought you were having an issue getting >40 fL (or >137 cd/m^2)..

You may be able to squeeze more, the North American Pros can see 52-56 fL on the 9G Elites

[ControlCAL]

.delete.

[Kratus]

is it possible to download a 25% grey scale hd pattern?

Hi, I meant 25% of screen size or less... you don't want Windowed Pattern 1/2 the size of the screen (50%)... This applies to all Plasmas...


We suggest AVS HD 709: http://www.controlcal.com/forum/showthread.php?t=24

those are patterns i used!!

Ce serait bien si le logiciel HCFR permettait également des mires de blans n'occupant que 15% de la surface de l'écran.
(c'est tout de même moins laborieux de calibrer avec le soft HCFR sur mon HTPC que de faire défiler manuellement les mires d'un DVD).

[couloun]

ahh, please do post settings and CalMAN reports (I gave a link above)..

Please convert to fL for light output..

Also, what model, LX-5090H/6090H, KRP-A, KRP-M???

it's a lx 5090h model, and i post my settings and reports later
Y for 100ire 166 cd/m^2

haha, that's pretty good 48.4 fL..

for some reason, I thought you were having an issue getting >40 fL (or >137 cd/m^2)..

You may be able to squeeze more, the North American Pros can see 52-56 fL on the 9G Elites

I think i could have better!!

[couloun]

ahh, please do post settings and CalMAN reports (I gave a link above)..

Please convert to fL for light output..

Also, what model, LX-5090H/6090H, KRP-A, KRP-M???

it's a lx 5090h model, and i post my settings and reports later
Y for 100ire 166 cd/m^2

haha, that's pretty good 48.4 fL..

for some reason, I thought you were having an issue getting >40 fL (or >137 cd/m^2)..

You may be able to squeeze more, the North American Pros can see 52-56 fL on the 9G Elites

what others parameters can improve contrast in as isf calibration? DRE mode can be?

[ControlCAL]

I guess I'm confused, you are unhappy with achieving 48fL without clipping whites and/or other issues? You want more light output than 48fL?

I doubt any other consumer Plasma from any manufacturer can do what the 9G Pioneers can do..

I keep my PRO-141FD at 45fL for isf Day (I tested 32fL to 49fL, 48/49fL was uncomfortable to watch and gave my Wife headaches), 32 fL for isf Night (critical viewing of Bluray Movies in light controlled room).

48fL while maintaining calibration is awesome, other consumer Plasmas cannot do that.


btw, comparison pictures of Pure, isf Night, isf Day (all calibrated):

http://www.controlcal.com/forum/showpos ... ostcount=4


.

[couloun]

I guess I'm confused, you are unhappy with achieving 48fL without clipping whites and/or other issues? You want more light output than 48fL?

I doubt any other consumer Plasma from any manufacturer can do what the 9G Pioneers can do..

I keep my PRO-141FD at 45fL for isf Day (I tested 32fL to 49fL, 48/49fL was uncomfortable to watch and gave my Wife headaches), 32 fL for isf Night (critical viewing of Bluray Movies in light controlled room).

48fL while maintaining calibration is awesome, other consumer Plasmas cannot do that.


btw, comparison pictures of Pure, isf Night, isf Day (all calibrated):

http://www.controlcal.com/forum/showpos ... ostcount=4


.

I think i can improve my contrast on my tv, so that's why i'm searching others parameters to improve that even though the actually contrast is very good.
Actually for 100 ire i have 48fl, and i don't have this feeling to have clipping whites, my calibration is very good, i will send to you my settings and reports
soon, and you will give your opinion

[tofrobert]

Bonjour, je suis très tenté de faire la "calibration" avec le logiciel mais y aurait il une âme charitable qui pourrait faire un tutoriel pas à pas complet pour les nuls : téléchargement, branchements notamment. Faut il uniquement un pc portable ou une tour peut faire?

D'avance merci!

[ControlCAL]

Bonjour, je suis très tenté de faire la "calibration" avec le logiciel mais y aurait il une âme charitable qui pourrait faire un tutoriel pas à pas complet pour les nuls : téléchargement, branchements notamment. Faut il uniquement un pc portable ou une tour peut faire?

D'avance merci!

I posted some:

Step-by-Step: Activating the ISFccc Memories and Entering Posted Settings: http://www.controlcal.com/forum/showpos ... stcount=16